Fastener Drive Tools For Sale | Caliber Tooling - (8469 Products)
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2407M
Item #: 94474293
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.2407MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#7
Inner Diameter (Decimal Inch)
2.2407
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® Torque Multiplier 1200 ft-lbs
Item #: KP4221105
Manufacturer: Proto
Mfg #: J6212CERT
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 19-19/32
•Model Number: J6212CERT
Description:
•Maximum rated input: 200 ft-lbs (271 Nm).•Maximum rated output: 1200 ft-lbs (1626 Nm).
•Standard torque accuracy is +/- 5% of reading.
•Reaction system: tubular reaction bar.
•Gear system: single stage planetary.
•Angle of turn protractor: 5° increments.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
Shipping Info:
•Actual Weight - 13.8000
•Dimensions - Height: 5.20 Length: 16.0 Width: 12.7
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® Torque Tester Floor Stand
Item #: KP4220225
Manufacturer: Proto
Mfg #: J6470S
Technical Specifications:
•Brand Name: Proto
•For Use With: J6470, J6472, J6474, J6476, J6478
•Head Height: 32
•Length: 4
•Model Number: J6470S
•Width: 7
Description:
•Floor stand for Proto® Torque Testing systems makes installation quick and easy.
•All steel construction.
•Mounting holes predrilled to match Proto® test systems.•Floor mount holes are pre-drilled for securing to the floor.
•Small footprint for space saving economy.
•Durable powder coated paint.
Shipping Info:
•Actual Weight - 41.6600
•Dimensions - Height: 6.50 Length: 40.3 Width: 8.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2200 ft/lbs - Torque Multiplier with Planetary-Gear
Item #: KL45TM392
Manufacturer: CDI
Mfg #: 9261274
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Female: 1/2
•Gear Ratio: 15:0:1
•Head Diameter: 4-1/16
•Head Height: 5-3/4
•Input Capacity: 162
•Length: 19-39/64
•Male: 1
•Torque Range: 2200 max
•Torque Ratio: 13:6:1
•Type: Torque Multiplier
Description:
•Designed where high torques are necessary for fastening or breaking out stubborn fasteners.
•Allows operator safe and easy means of producing torque for job requirements
•Precision planetary gear multiplies the operator's input from standard torque wrenches
•Can also multiply the torque from air-driven (non-impact) wrenches
Shipping Info:
•Actual Weight - 20.6000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.25% 60-600FT/LB J6373B
Item #: KP4221180
Manufacturer: Proto
Mfg #: J6373B
Technical Specifications:
•Brand Name: Proto
•Model Number: J6373B
Description:
Shipping Info:
•Actual Weight - 5.0100
•Addl Fee Under 70lb -$14.25 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 1/2" Box End Torque Wrench Head - H4 Tang
Item #: KP4219520
Manufacturer: Proto
Mfg #: JH4-16B
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH4-250, JH4-150PS, JH4-50FPS
•Head Height: 7/16
•Length: 3-1/8
•Maximum Output: 900
•Model Number: JH4-16B
•Size: 1/2
•Width: 25/32
Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners.
•12 point box end allows for fine indexing, helping to improve speed and access.
•Fits 4, 6 and 12 point fasteners.
•Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener.
•Countersunk on both sides to allow for easy application to the fastener.
Shipping Info:
•Actual Weight - .1100
•Dimensions - Height: .500 Length: 3.20 Width: .800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1" DR CLICK TRQ WR 2000FT LB
Item #: KL4520005MFMHSS
Manufacturer: CDI
Mfg #: 9261939
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Metal Handle Click Type
•Drive: 1
•Increments: 10 Nm
•Length: 108.5
•Torque Range: 300-2000 ft/lbs
•Type: Micro Adjustable Torque Wrench
Description:
Shipping Info:
•Actual Weight - 57.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2331MC
Item #: 98865140
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.2331MCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#7
Inner Diameter (Decimal Inch)
2.2331
Calibrated
Yes
Traceability Certification Included
NIST
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21mm Opening - "Y" Drive - Standard Box End - Pre-Set Torque Head
Item #: KL45TCQYXM21A
Manufacturer: CDI
Mfg #: 9936950
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Drive Head for Pre-Set Torque Wrench
•Drive: Y-(0.560)
•Metric: 21
•Type: Box End
Description:
•12-Point Box End Heads Metric
Shipping Info:
•Actual Weight - .2075
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8" Opening - "J" Drive - Open End - Pre-Set Torque Head
Item #: KL45TCQJO12A
Manufacturer: CDI
Mfg #: TCQJO12A
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Drive Head for Pre-Set Torque Wrench
•Drive: J-(0.425)
•Size: 3/8
•Type: Open End
Description:
•Open End-SAE Pre-Set Torque Heads
Shipping Info:
•Actual Weight - .0706
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 11/16" Open End Torque Wrench Head - H7 Tang
Item #: KP4219980
Manufacturer: Proto
Mfg #: JH7-22
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH7-250F, JH7-6014C
•Head Height: 13/16
•Length: 5-7/16
•Maximum Output: 1185
•Model Number: JH7-22
•Size: 11/16
•Width: 1-7/16
Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.
Shipping Info:
•Actual Weight - .3800
•Dimensions - Height: .800 Length: 5.50 Width: 1.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 16mm Box End Torque Wrench Head - H5 Tang
Item #: KP4219665
Manufacturer: Proto
Mfg #: JH5-16MB
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS
•Head Height: 5/8
•Length: 3-27/32
•Maximum Output: 2050
•Model Number: JH5-16MB
•Size: 10mm
•Width: 15/16
Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners.
•12 point box end allows for fine indexing, helping to improve speed and access.
•Fits 4, 6 and 12 point fasteners.
•Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener.
•Countersunk on both sides to allow for easy application to the fastener.
Shipping Info:
•Actual Weight - .1900
•Dimensions - Height: .600 Length: 3.90 Width: 1.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Electronic Torque Tester 25-250 in-lbs
Item #: KP4220210
Manufacturer: Proto
Mfg #: J6472
Technical Specifications:
•Brand Name: Proto
•Head Height: 4-1/2
•Length: 6
•Maximum Output: 250
•Model Number: J6472
•Width: 6
Description:
•Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
•Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
•Broad accuracy range extends from 10% to 100% of full scale.
•Three units of measure are available ft-lb, in-lb, and Nm.
•Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
•Fast sampling rate helps maintain high accuracy during torque applications.
•Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
•Powered by a standard 9V battery, providing up to 50 hours run time.
•N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
•Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
•Testers meet or exceed requirements set forth in ASME B107.29
Shipping Info:
•Actual Weight - 5.8800
•Dimensions - Height: 7.50 Length: 8.80 Width: 8.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 1/4" Drive Fixed Head Micrometer Torque Wrench 40-200 in-lbs
Item #: KP4220705
Manufacturer: Proto
Mfg #: J6061CXCER
Technical Specifications:
•Brand Name: Proto
•Finish: Full Polish
•Length: 11-45/64
•Maximum Output: 200
•Model Number: J6061CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 2.6300
•Dimensions - Height: 2.50 Length: 19.3 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 5/8" Box End Torque Wrench Head - H5 Tang
Item #: KP4219615
Manufacturer: Proto
Mfg #: JH5-20B
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH5-100F, JH5-6006C, JH5-150FPS, JH5-200FPS
•Head Height: 5/8
•Length: 3-27/32
•Maximum Output: 2050
•Model Number: JH5-20B
•Size: 5/8
•Width: 15/16
Description:
•The Proto® TorquePlus™ Design, a high performance drive configuration which allows for quick and easy wrench engagement with the fastener flats, not the corners.
•12 point box end allows for fine indexing, helping to improve speed and access.
•Fits 4, 6 and 12 point fasteners.
•Indexed to 7.5° to help keep shank clear of obstructions by allowing the user to flip the wrench over to continue turning the fastener.
•Countersunk on both sides to allow for easy application to the fastener.
Shipping Info:
•Actual Weight - .1900
•Dimensions - Height: .600 Length: 3.90 Width: 1.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/16" Opening - "J" Drive - Box End 0° - Pre-Set Torque Head
Item #: KL45TCQJXD18A
Manufacturer: CDI
Mfg #: 9934949
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Drive Head for Pre-Set Torque Wrench
•Drive: J-(0.425)
•Size: 9/16
•Type: Box End Offset 0°
Description:
•Box End Offset 0 ° & 10 ° SAE Pre-Set Torque Ratcheting Hd
Shipping Info:
•Actual Weight - .0002
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 3/8" Drive Ratcheting Head Micrometer Torque Wrench 16-80 ft-lbs
Item #: KP4220785
Manufacturer: Proto
Mfg #: J6006CXCER
Technical Specifications:
•Brand Name: Proto
•Description: Yes
•Finish: Full Polish
•Length: 15-1/32
•Model Number: J6006CXCERT
Description:
•Calibrated to +/- 4% in clockwise direction and +/- 6% in counter clockwise direction.
•Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity.
•Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). CERT Version Only.
•Manufactured to meet precision/highly accurate applications such as military and aerospace.
Shipping Info:
•Actual Weight - 3.0600
•Dimensions - Height: 2.40 Length: 19.2 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 1-1/16" Open End Torque Wrench Head - H7 Tang
Item #: KP4220010
Manufacturer: Proto
Mfg #: JH7-34
Technical Specifications:
•Brand Name: Proto
•Finish: Black Oxide
•For Use With: JH7-250F, JH7-6014C
•Head Height: 13/16
•Length: 5-23/32
•Maximum Output: 3600
•Model Number: JH7-34
•Size: 1-1/16
•Width: 2-7/32
Description:
•Open end is angled to 15° to help keep shank clear of obstructions helping to improve access.
Shipping Info:
•Actual Weight - .6700
•Dimensions - Height: .800 Length: 5.80 Width: 2.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15/16" Opening - "Y" Drive - Standard Box End - Pre-Set Torque Head
Item #: KL45TCQYX30A
Manufacturer: CDI
Mfg #: 9936691
Technical Specifications:
•Brand Name: CDI
•Class: Wrench
•Description: Drive Head for Pre-Set Torque Wrench
•Drive: Y-(0.560)
•Size: 15/16
•Type: Box End
Description:
Shipping Info:
•Actual Weight - .2604
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.1139N
Item #: 19980218
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.1139NProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00004/-.00000
Blank Number Wire Size
#7
Inner Diameter (Decimal Inch)
2.1139
Calibrated
No
Traceability Certification Included
No
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It