Fasteners > Bolts Screws & Cap Screws (ET04) - (44225 Products)
Fasteners > Bolts Screws & Cap Screws (ET04)
DGAHR-258
Item #: 05107362
Brand: GSG
Model #: GSG-CR-0.1444CProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
0.00000/-0.00002
Blank Number Wire Size
#00
Inner Diameter (Decimal Inch)
0.1444
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
Go
Standards
B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code
41111619
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
YE4M-1N
Item #: FG30071210
Brand: Tool-Flo
Model #: 2402763
| Product Specifications | |
|---|---|
| Application | | External Threading | Internal Threading lay down | |
| Body Material | Steel |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CM-114 CLAMP
Item #: FG30016800
Brand: Tool-Flo
Model #: 2400876
| Product Specifications | |
|---|---|
| Application | | Ext Threading Chasers | |
| Body Material | Steel |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/16-4FL-SE-LONG (1x2-1/2)
Item #: MW21251002022
Brand: Monster Tool Company
Model #: 251-002022
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.0625″ |
| Coating | Bright |
| Series/List # | 251 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16x4 D.E. 30° CON. ENG BLK
Item #: MW16723312400
Brand: Monster Tool Company
Model #: 723-312400
| Product Specifications | |
|---|---|
| Coating | Ground |
| Decimal Equivalent | 0.3125″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Point Angle (SIG) | 30 Degrees |
| End Shape | Conical Point |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 4″ |
| Single / Double End | Double End |
| Series/List # | 723 |
| Length Group | Extended |
| Cutting Diameter (DC) | 5/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8x1-1/2 RH w/CR B-BAR (.050min. x .300max)
Item #: MW22601050300
Brand: Monster Tool Company
Model #: 601-050300
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Overhang Minimum (OHN) | 0.013″ |
| Maximum Bore Diameter (DMAX) | 0.05″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Minimum Bore Diameter (DMIN) | 0.3″ |
| Style | Corner Radius |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Coating | Bright |
| Series/List # | 601 |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.004″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
STBN-2 5/16″ BN SCREW
Item #: FG30053940
Brand: Tool-Flo
Model #: 2407861
| Product Specifications | |
|---|---|
| Application | | Spare Parts | |
| Body Material | Steel |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3915 ST FL RHC REAMER
Item #: MW205000003915
Brand: Monster Tool Company
Model #: 500-0003915
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3915″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.3915″ |
| Decimal Equivalent | 0.3915″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0839 ST FL RHC REAMER
Item #: MW205000000839
Brand: Monster Tool Company
Model #: 500-0000839
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0839″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0839″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0839″ |
| Overall Length (OAL) | 2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
29/64-2FL-SE-REG AlTiN
Item #: MW21204031192
Brand: Monster Tool Company
Model #: 204-031192
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 29/64″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4531″ |
| Coating | AlTiN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SC-3L (1LOC) D/C
Item #: MW17310002940
Brand: Monster Tool Company
Model #: 310-002940
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 1″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Double Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2-3/4″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Grade | C-2 Sub-Micron |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
| Coating | Bright |
| Length Group | Regular |
| End Shape | Cylinder - Radius End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11/32 CARB TWIST DRILL AlTiN
Item #: MW23450103438B
Brand: Monster Tool Company
Model #: 450-103438B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 11/32″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 11/32″ |
| Grade | C-2 Sub-Micron |
| Decimal Equivalent | 0.3438″ |
| Point Shape | Drill Point |
| Length Group | Jobber |
| Measurement Type | Inch |
| Coating | TiAlN |
| Series/List # | 450 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | |
| Length Chip Flute (LCF) | 2-1/2″ |
| Application | | Drilling | |
| Overall Length (OAL) | 4″ |
| Connection Diameter Machine Side (DCONMS) | 11/32″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 118 Degrees |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 25 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3186 ST FL RHC REAMER
Item #: MW205000003186
Brand: Monster Tool Company
Model #: 500-0003186
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3186″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.3186″ |
| Decimal Equivalent | 0.3186″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11mm-4FL-SE REG (25mm LOC)
Item #: MW21206001410
Brand: Monster Tool Company
Model #: 206-001410
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 11 mm |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 25 mm |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 76 mm |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4331″ |
| Coating | Bright |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.045-4FL-SE-REG-.015R
Item #: MW212505404515
Brand: Monster Tool Company
Model #: 250-5404515
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.045″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.135″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.045″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4189 ST FL RHC REAMER
Item #: MW205000004189
Brand: Monster Tool Company
Model #: 500-0004189
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4189″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4189″ |
| Decimal Equivalent | 0.4189″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0961 ST FL RHC REAMER
Item #: MW205000000961
Brand: Monster Tool Company
Model #: 500-0000961
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0961″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0961″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0961″ |
| Overall Length (OAL) | 2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0593 ST FL RHC REAMER
Item #: MW205000000593
Brand: Monster Tool Company
Model #: 500-0000593
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0593″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0593″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0593″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.059-2FL-SE-STUB-AlTiN
Item #: MW21250300640B
Brand: Monster Tool Company
Model #: 250-300640B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.059″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.089″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.059″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It