Holemaking > Counterbores & Porting Tools (ET04) - (2029 Products)
Holemaking > Counterbores & Porting Tools (ET04)
1/4X1/2X2-1/2 5FL 0.015CR
Item #: HS1081736
Brand: Helical Solutions
Model #: 81736
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | 2D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/16-2FL-SE-REG w/.015R TiCN
Item #: MW21204602963
Brand: Monster Tool Company
Model #: 204-602963
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-3/4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | TiCN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8-2FL-SE-REG TiCN
Item #: MW21204001179
Brand: Monster Tool Company
Model #: 204-001179
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.375″ |
| Coating | TiCN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill; 0.02″ Radius × 1/4″ Dia. × 3/4″ LOC × 1/4″ Shank Dia. × 2-1/2″ OAL, 2 Flutes, Carbide, ZrN
Item #: TA15TC64716
Brand: Titan USA
Model #: TC64716
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Helix Angle (FHA) | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Usable Length (LU) | 3/4″ |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | ZrN |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.02″ |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Dia-2-5/16″ OAL-HSS-Non-Center Cut SE EM-4 FL
Item #: 99228678
Brand: Scientific Cutting Tools
Model #: AS5202-28SAProduct Specifications
Spotface Diameter (Decimal Inch)
3.0500
Tube Outside Diameter Compatibility (Inch)
1-3/4
Pilot Type
Plain
Port Thread Size (Decimal Inch)
2-1/4 - 12
Tool Material
Carbide-Tipped
Tube Dash Number
28.000
Minimum Pilot Diameter (Decimal Inch)
2.1720
Pilot Length
0.6670
Overall Length (Inch)
4-1/2
Number Of Flutes
3
Standards
AS5202; MS33649
Shank Type
Straight
Identification Groove
No
Series
Standard
Seal Angle
30
Thread Type
UNJ
Flute Type
Straight
Shank Diameter (Decimal Inch)
1-1/4
Shank Length (Decimal Inch)
2.2500
Maximum Pilot Diameter (Decimal Inch)
2.2755
Head Length (Decimal Inch)
2.2500
Workpiece Compatibility
Tubes
Coating/Finish
AlTiN
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DC 5/8″ x DCONMS 5/8″ x APMX 1″ x OAL 6″
Item #: CW809587953
Brand: Precision Cutting Tools
Model #: 9587953
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Corner Radius (RE) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Grade | H5003 Vulcan |
| Depth of Cut Maximum (APMX) | 1″ |
| Neck Diameter (DN) | 0.6 |
| Overall Length (OAL) | 6″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 7 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid Carbide Endmill |
| Coating | VARIANTIC |
| Length Group | Long - Necked |
| Flute Count (NOF) | 7 |
| Coolant Supply Property (CSP) | External |
| Flute Helix Angle (FHA) | 40 Degrees |
| Shank Standard | h6 |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.625″ |
| Usable Length (LU) | 4″ |
| Measurement Type | Inch |
| Applicable Material | | Cast Iron | Hard Materials | Stainless Steel | Steel | Super-Alloys / Titanium | |
| Series/List # | 777 |
| Application | | Finish | HEM | Semi Finish | Shouldering | |
| Shank Size (SS) | 5/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
65268 .090-2F-BN-ALTIN
Item #: 99244618
Brand: Scientific Cutting Tools
Model #: SAEJ1926-32RProduct Specifications
Spotface Diameter (Decimal Inch)
3.4900
Tube Outside Diameter Compatibility (Inch)
2
Pilot Type
Reamer
Port Thread Size (Decimal Inch)
2-1/2-12
Tool Material
Carbide-Tipped
Tube Dash Number
32.000
Minimum Pilot Diameter (Decimal Inch)
2.4170
Pilot Length
0.7770
Overall Length (Decimal Inch)
5.1500
Number Of Flutes
3
Standards
SAEJ1926; MS16142
Shank Type
Straight
Identification Groove
No
Series
Standard
Seal Angle
15
Thread Type
UN
Flute Type
Straight
Shank Diameter (Decimal Inch)
1-1/4
Shank Length (Decimal Inch)
2.5000
Maximum Pilot Diameter (Decimal Inch)
2.5895
Head Length (Decimal Inch)
2.6500
Workpiece Compatibility
Tubes
Coating/Finish
Bright
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
65210 .064-4F-SE-BN-ALTIN
Item #: 13507389
Brand: Scientific Cutting Tools
Model #: AS5202-32RProduct Specifications
Spotface Diameter (Decimal Inch)
3.5200
Tube Outside Diameter Compatibility (Inch)
2
Pilot Type
Reamer
Port Thread Size (Decimal Inch)
2-1/2-12
Tool Material
Carbide-Tipped
Tube Dash Number
32.000
Minimum Pilot Diameter (Decimal Inch)
2.4240
Pilot Length
1.2550
Overall Length (Decimal Inch)
5.1500
Number Of Flutes
3
Standards
AS5202; MS33649
Shank Type
Straight
Identification Groove
No
Series
Standard
Seal Angle
30
Thread Type
UNJ
Flute Type
Straight
Shank Diameter (Decimal Inch)
1-1/4
Shank Length (Decimal Inch)
2.5000
Maximum Pilot Diameter (Decimal Inch)
2.5265
Head Length (Decimal Inch)
2.6500
Workpiece Compatibility
Tubes
Coating/Finish
Bright
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keyseat Cutter, 1/8″ Dia. × 1/8″ Shank Dia. × 1/16″ CW × 1-1/2″ OAL, 6 Teeth, Carbide, Round Shank, Uncoated, Specialty Profiles
Item #: GE90749762
Brand: Harvey Tool
Model #: 749762
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Protruding Length (LPR) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | Uncoated |
| Number of Teeth | 6 |
| Shank Type | Round |
| Cutting Width (CW) | 1/16″ |
| Flute Type | Helical |
| Cutting Direction (HAND) | Right Hand |
| Series/List # | Specialty Profiles |
| Neck Diameter (DN) | 1/16″ |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
20mm-4FL-SE REG (38mm LOC) AlTiN
Item #: MW21206001460B
Brand: Monster Tool Company
Model #: 206-001460B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 20 mm |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 20 mm |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 38 mm |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 102 mm |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.7874″ |
| Coating | AlTiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
05300 7/64 3FL .010R EM
Item #: DD9005300
Brand: KYOCERA SGS Precision Tools
Model #: 05300
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/64″ |
| Neck Diameter (DN) | 0.1028″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 0.188″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Decimal Equivalent | 0.1094″ |
| Flute Count (NOF) | 3 |
| Series/List # | M032 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Size (SS) | 1/4″ |
| Shank Type | Round |
| Shank Length (LS) | 2.312″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.01″ |
| Usable Length (LU) | 0.188″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.01″ |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
05298 3/32 3FL SQ ENDMILL
Item #: DD9005298
Brand: KYOCERA SGS Precision Tools
Model #: 05298
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Neck Diameter (DN) | 0.0882″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Decimal Equivalent | 0.0938″ |
| Flute Count (NOF) | 3 |
| Series/List # | M032 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Size (SS) | 1/4″ |
| Shank Type | Round |
| Shank Length (LS) | 2-1/8″ |
| End Shape | Square |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 3/8″ |
| Single / Double End | Single End |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It