Holemaking > Drilling & Drill Bits (ET04) - (127326 Products)
Holemaking > Drilling & Drill Bits (ET04)
8.0mm CARB STUB DRILL
Item #: MW23460403150
Brand: Monster Tool Company
Model #: 460-403150
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 8 mm |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 8 mm |
| Tool Type | Drill |
| Length Group | Short/Stub |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Point Shape | Drill Point |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Measurement Type | Metric |
| Application | | Drilling | |
| Series/List # | 460 |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 41 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 72 mm |
| Point Angle (SIG) | 135 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 41 mm |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 15 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Guhring / Part #: 9065150050000
Item #: 98620974
Brand: Guhring
Model #: 9065150050000Product Specifications
Drill Bit Size (mm)
5.00
Overall Length (mm)
133.0000
Flute Length (mm)
93.00
Tool Material
Solid Carbide
Coating/Finish
Uncoated
Drill Point Angle
135
Shank Type
Cylindrical
Coolant Through
Yes
Flute Type
Spiral
Series
6515
Point Type
RT100 T
Cutting Direction
Right Hand
Tool Application
Deep Hole Drilling
Spiral Type
Regular Spiral
Drill Bit Diameter Tolerance
H7
Number Of Flutes
2
Primary Workpiece Material
Aluminum
Drill Bit Size (Decimal Inch)
0.1969
Shank Diameter (mm)
6.0000
Shank Length (mm)
36.000
Flute By Diameter Ratio
15xD
Maximum Drilling Depth (mm)
87.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-2FL-SE-REG w/.015R
Item #: MW21204603297
Brand: Monster Tool Company
Model #: 204-603297
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | Bright |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16″ Drill DIA High Speed Steel #8 × 6 Combined Drill and Countersink, 2 Flutes, Uncoated
Item #: TA15CS50086
Brand: Titan USA
Model #: CS50086
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5/16″ |
| Overall Length (OAL) | 6″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 5/16″ |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Decimal Equivalent | 0.3125″ |
| Coating | Uncoated |
| Point Angle (SIG) | 118 Degrees |
| Cutting Edge Material | HSS |
| Angle | 60 Degrees |
| Measurement Type | Inch |
| Protruding Length (LPR) | 5/16″ |
| Tool Type | Combined Drill and Countersink |
| Flute Count (NOF) | 2 |
| Single / Double End | Double End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 5/8″ Dia. × 1-1/4″ LOC × 5/8″ Shank Dia. × 3-1/2″ OAL, 2 FL, Carbide, TiCN
Item #: TA15TC91040
Brand: Titan USA
Model #: TC91040
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 1-1/4″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Corner Radius (RE) | 5/16″ |
| Overall Length (OAL) | 3-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | TiCN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.3125″ (5/16) Shank DIA × 82° Included Angle × 2.5″ (2-1/2) Overall Length × 0.06″ Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, Uncoated
Item #: TA15TC87616
Brand: Titan USA
Model #: TC87616
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Point Angle (SIG) | 82 Degrees |
| Decimal Equivalent | 0.3125″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 0.145″ |
| Coating | Uncoated |
| Flute Count (NOF) | 2 |
| End Shape | Flat |
| Depth of Cut Maximum (APMX) | 0.145″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.025″ Dia. × 0.037″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC55746
Brand: Titan USA
Model #: TC55746
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 5/16″ |
| Depth of Cut Maximum (APMX) | 0.037″ |
| Corner Radius (RE) | 0.0125″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 110° SGL FL DE CARB CNSK
Item #: MW18331207090
Brand: Monster Tool Company
Model #: 331-207090
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3-1/4″ |
| Angle | 55 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Series/List # | 331 |
| Flute Count (NOF) | 1 |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 110 Degrees |
| End Shape | Included Angle |
| Coating | Bright |
| Single / Double End | Double End |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.625″ |
| Applicable Material | Steel | Aluminum / Non-Ferrous Materials |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 0.18″ Dia. × 0.1755″ Shank Dia. × 4-1/2″ OAL, 6 Flutes, HSS, Uncoated
Item #: TA15TR96087
Brand: Titan USA
Model #: TR96087
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.18″ |
| Overall Length (OAL) | 4-1/2″ |
| Usable Length (LU) | 1-1/8″ |
| Coating | Uncoated |
| Cutting Edge Length (L) | 1-1/8″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 0.1755″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.272″ Dia. × 0.272″ Shank Dia. × 2-1/2″ OAL × 1-1/4″ LCF, 135 Degrees, 2 Flute, Uncoated, Solid Carbide Drills
Item #: TA15TC20109
Brand: Titan USA
Model #: TC20109
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.272″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.272″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Usable Length (LU) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 0.272″ |
| Length Chip Flute (LCF) | 1-1/4″ |
| Point Angle (SIG) | 135 Degrees |
| Overall Length (OAL) | 2-1/2″ |
| Functional Length (LF) | 1-1/4″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#0 Dia. × 11/64″ Shank Dia. × 2-15/16″ OAL, 4 Flutes, HSS, Uncoated, Taper Pin Reamer
Item #: TA15TR97552
Brand: Titan USA
Model #: TR97552
| Product Specifications | |
|---|---|
| Tool Type | Taper Pin Reamer |
| Cutting Edge Length (L) | 1-11/16″ |
| Size | #0 |
| Large End Diameter | 0.1638″ |
| Length Chip Flute (LCF) | 1-11/16″ |
| Small End Diameter | 0.1287″ |
| Flute Count (NOF) | 4 |
| Cutting Edge Material | HSS |
| Overall Length (OAL) | 2-15/16″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 11/64″ |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 0.179″ Dia. × 0.1755″ Shank Dia. × 4-1/2″ OAL, 6 Flutes, HSS, Uncoated
Item #: TA15TR94270
Brand: Titan USA
Model #: TR94270
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.179″ |
| Overall Length (OAL) | 4-1/2″ |
| Usable Length (LU) | 1-1/8″ |
| Coating | Uncoated |
| Cutting Edge Length (L) | 1-1/8″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 0.1755″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.057″ Dia. × 0.171″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 FL, Carbide, AlTiN
Item #: TA15TC57257
Brand: Titan USA
Model #: TC57257
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.057″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.171″ |
| Depth of Cut Maximum (APMX) | 0.171″ |
| Corner Radius (RE) | 0.0285″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.266″ Dia. × 0.266″ Shank Dia. × 2-1/2″ OAL × 1-1/4″ LCF, 140 Degrees, 2 Flute, Uncoated, Solid Carbide Drills
Item #: TA15TC19608
Brand: Titan USA
Model #: TC19608
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.266″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 0.266″ |
| Measurement Type | Inch |
| Coating | Uncoated |
| Usable Length (LU) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 0.266″ |
| Length Chip Flute (LCF) | 1-1/4″ |
| Point Angle (SIG) | 140 Degrees |
| Overall Length (OAL) | 2-1/2″ |
| Functional Length (LF) | 1-1/4″ |
| Flute Count (NOF) | 2 |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.375″ (3/8) Shank DIA × 100° Included Angle × 2.5″ (2-1/2) Overall Length × 0.06″ Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
Item #: TA15TC87822
Brand: Titan USA
Model #: TC87822
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Point Angle (SIG) | 100 Degrees |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 0.132″ |
| Coating | AlTiN |
| Flute Count (NOF) | 4 |
| End Shape | Flat |
| Depth of Cut Maximum (APMX) | 0.132″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4160 ST FL RHC REAMER
Item #: MW205000004160
Brand: Monster Tool Company
Model #: 500-0004160
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.416″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.416″ |
| Decimal Equivalent | 0.416″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L6230 - 6.5 mm Dia. × 20 mm LOC × 10 mm Shank Dia. × 65 mm OAL, 2 Flutes, HSSCo, Bright Coating, Square End Mill
Item #: NE100107970
Brand: Nachi America Inc
Model #: 0107970
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6.5 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 20 mm |
| End Shape | Square |
| Overall Length (OAL) | 65 mm |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | HSSCo |
| Tool Type | End Mill |
| Coating | Bright |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 7/16″ Dia. × 9/16″ LOC × 7/16″ Shank Dia. × 2-3/4″ OAL, 4 FL, Carbide, AlTiN
Item #: TA15TC14728
Brand: Titan USA
Model #: TC14728
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Usable Length (LU) | 9/16″ |
| Depth of Cut Maximum (APMX) | 9/16″ |
| Corner Radius (RE) | 7/32″ |
| Overall Length (OAL) | 2-3/4″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.25″ (1/4) Shank DIA × 120° Included Angle × 2.5″ (2-1/2) Overall Length × 0.044″ Tip DIA Carbide Tipped Off Chamfer Mill, 2 Flutes, AlTiN Coated
Item #: TA15TC87711
Brand: Titan USA
Model #: TC87711
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Point Angle (SIG) | 120 Degrees |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 0.059″ |
| Coating | AlTiN |
| Flute Count (NOF) | 2 |
| End Shape | Flat |
| Depth of Cut Maximum (APMX) | 0.059″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.03″ Dia. × 0.09″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 FL, Carbide, Uncoated
Item #: TA15TC59030
Brand: Titan USA
Model #: TC59030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.03″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.09″ |
| Depth of Cut Maximum (APMX) | 0.09″ |
| Corner Radius (RE) | 0.015″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It