Walter-Titex - 20mm Solid Carbide 8 Flute Chucking Reamer

Item #: 36277721
Brand: Walter-Titex
Model #: 6354359

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (mm) 20.00

Reamer Diameter (Decimal Inch) 0.7874

Reamer Material Solid Carbide

Shank Type Straight

Flute Type Straight

Overall Length (mm) 150.00

Overall Length (Decimal Inch) 5.9055

Flute Length (mm) 25.00

Flute Length (Decimal Inch) 0.9843

Variable Diameter Reamer Type None

Number of Flutes 8

Maximum Shank Diameter (mm) 20.00

Maximum Shank Diameter (Decimal Inch) 0.7874

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Reamer Diameter Tolerance (mm) +0.004

Through Coolant Yes

Product Specifications
Reamer Diameter (mm)	20.00
Reamer Diameter (Decimal Inch)	0.7874
Reamer Material	Solid Carbide
Shank Type	Straight
Flute Type	Straight
Overall Length (mm)	150.00
Overall Length (Decimal Inch)	5.9055
Flute Length (mm)	25.00
Flute Length (Decimal Inch)	0.9843
Variable Diameter Reamer Type	None
Number of Flutes	8
Maximum Shank Diameter (mm)	20.00
Maximum Shank Diameter (Decimal Inch)	0.7874
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright
Reamer Diameter Tolerance (mm)	+0.004
Through Coolant	Yes

$421.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 0.671" High Speed Steel Chucking Reamer

Item #: 72036718
Brand: Made in USA
Model #:

Features and Benefits

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

Product Specifications

Reamer Diameter (Decimal Inch) 0.6710

Reamer Material High Speed Steel

Shank Type Straight

Flute Type Straight

Variable Diameter Reamer Type None

Over/Under Size Reamer No

Dowel Pin Reamer No

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Product Specifications
Reamer Diameter (Decimal Inch)	0.6710
Reamer Material	High Speed Steel
Shank Type	Straight
Flute Type	Straight
Variable Diameter Reamer Type	None
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright

$182.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-LG 2x4 TiN

Item #: MW21215001051
Brand: Monster Tool Company
Model #: 215-001051

Product Specifications
Cutting Diameter (DC)	7/16″
Applicable Material	\| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Connection Diameter Machine Side (DCONMS)	7/16″
Application	\| Slotting \| Profiling \| Rampdown \|
Depth of Cut Maximum (APMX)	2″
Grade	C-2 Sub-Micron
Overall Length (OAL)	4″
Length Group	Long
Cutting Edge Material	Solid Tungsten Carbide
Decimal Equivalent	0.4375″
Coating	TiN
Series/List #	215
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Single / Double End	Single End
End Shape	Square
Center Cutting	Yes

$70.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-REG BN TiN

Item #: MW21223001101
Brand: Monster Tool Company
Model #: 223-001101

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	1″
Length Group	Regular
Overall Length (OAL)	‎2-3/4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiN
Series/List #	223
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$58.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-LG BN 2x4 AlTiN

Item #: MW21226001054
Brand: Monster Tool Company
Model #: 226-001054

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	2″
Length Group	Long
Overall Length (OAL)	4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiAlN
Series/List #	226
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$91.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Magafor - 1.1405mm Solid Carbide 4 Flute Chucking Reamer

Item #: 02759322
Brand: Magafor
Model #: 88860001140

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.

Spiral flute reamers are used in blind and through-hole operations. They are used to bridge interrupted cuts.

Product Specifications

Reamer Diameter (mm) 1.14

Reamer Diameter (Decimal Inch) 0.0449

Reamer Material Solid Carbide

Shank Type Straight

Flute Type Spiral

Overall Length (Inch) 1-9/16

Flute Length (Inch) 25/64

Flute Length (Decimal Inch) 0.3930

Variable Diameter Reamer Type None

Number of Flutes 4

Maximum Shank Diameter (Decimal Inch) 0.0449

Over/Under Size Reamer No

Dowel Pin Reamer No

Spiral Direction Left Hand

Cutting Direction Right Hand

Reamer Finish/Coating Bright

Reamer Diameter Tolerance (mm) 0.0000 to +0.0003

Product Specifications
Reamer Diameter (mm)	1.14
Reamer Diameter (Decimal Inch)	0.0449
Reamer Material	Solid Carbide
Shank Type	Straight
Flute Type	Spiral
Overall Length (Inch)	1-9/16
Flute Length (Inch)	25/64
Flute Length (Decimal Inch)	0.3930
Variable Diameter Reamer Type	None
Number of Flutes	4
Maximum Shank Diameter (Decimal Inch)	0.0449
Over/Under Size Reamer	No
Dowel Pin Reamer	No
Spiral Direction	Left Hand
Cutting Direction	Right Hand
Reamer Finish/Coating	Bright
Reamer Diameter Tolerance (mm)	0.0000 to +0.0003

$50.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

.2785 ST FL RHC REAMER

Item #: MW205000002785
Brand: Monster Tool Company
Model #: 500-0002785

Product Specifications
Cutting Diameter (DC)	0.2785″
Coating	Bright
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \| Aluminum / Non-Ferrous Materials \|
Cutting Edge Material	Solid Tungsten Carbide
Usable Length (LU)	‎1-1/8″
Measurement Type	Inch
Cutting Edge Length (L)	‎1-1/8″
Series/List #	500
Connection Diameter Machine Side (DCONMS)	0.2785″
Decimal Equivalent	0.2785″
Flute Count (NOF)	6
End Shape	45° Chamfered End
Overall Length (OAL)	‎3-1/4″
Cutting Diameter Tolerance	‎+0.0003 / -0.0000
Neck Length (LN)	3/4″
Single / Double End	Single End
Cutting Direction (HAND)	Right Hand
Length Group	Regular
Grade	C-2 Sub-Micron

$80.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-REG BN

Item #: MW21223001100
Brand: Monster Tool Company
Model #: 223-001100

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	1″
Length Group	Regular
Overall Length (OAL)	‎2-3/4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	Bright
Series/List #	223
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$47.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-LG BN 2x4 TiN

Item #: MW21226001051
Brand: Monster Tool Company
Model #: 226-001051

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	2″
Length Group	Long
Overall Length (OAL)	4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiN
Series/List #	226
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$88.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-LG BN 2x4 TiCN

Item #: MW21226001052
Brand: Monster Tool Company
Model #: 226-001052

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	2″
Length Group	Long
Overall Length (OAL)	4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiCN
Series/List #	226
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$91.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-REG

Item #: MW21206001190
Brand: Monster Tool Company
Model #: 206-001190

Product Specifications
Cutting Diameter (DC)	7/16″
Applicable Material	\| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Connection Diameter Machine Side (DCONMS)	7/16″
Application	\| Slotting \| Profiling \| Rampdown \|
Depth of Cut Maximum (APMX)	1″
Grade	C-2 Sub-Micron
Overall Length (OAL)	‎2-3/4″
Length Group	Regular
Cutting Edge Material	Solid Tungsten Carbide
Decimal Equivalent	0.4375″
Coating	Bright
Series/List #	206
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Single / Double End	Single End
End Shape	Square
Center Cutting	Yes

$34.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-LG BN 2x4

Item #: MW21226001050
Brand: Monster Tool Company
Model #: 226-001050

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	2″
Length Group	Long
Overall Length (OAL)	4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	Bright
Series/List #	226
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$76.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-REG BN AlTiN

Item #: MW21223001118
Brand: Monster Tool Company
Model #: 223-001118

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	1″
Length Group	Regular
Overall Length (OAL)	‎2-3/4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiAlN
Series/List #	223
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$60.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

‎7/16-4FL-SE-REG BN TiCN

Item #: MW21223001102
Brand: Monster Tool Company
Model #: 223-001102

Product Specifications
Cutting Diameter (DC)	7/16″
Application	\| Profiling \| Rampdown \| Profile Cutting \| Radiusing \| Radius Slotting \|
Connection Diameter Machine Side (DCONMS)	7/16″
Grade	C-2 Sub-Micron
Depth of Cut Maximum (APMX)	1″
Length Group	Regular
Overall Length (OAL)	‎2-3/4″
End Shape	Ballnose
Cutting Edge Material	Carbide
Decimal Equivalent	0.4375″
Coating	TiCN
Series/List #	223
Flute Count (NOF)	4
Cutting Direction (HAND)	Right Hand
Flute Helix Angle (FHA)	30 Degrees
Center Cutting	Yes
Applicable Material	\| Steel \| Stainless Steel \| Cast Iron \| Hard Materials \| Super-Alloys / Titanium \|
Single / Double End	Single End

$60.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 11/16" Reamer Diam, 0.006" Max Expansion, Straight Shank, 3" Flute Length, Hand Expansion Reamer

Item #: 02510444
Brand: Value Collection
Model #:

Features and Benefits

Expansion reamers are constructed with an adjustable screw that increases the diameter of the cutting head. They are used to expand hole sizes. They maintain their original dimensions after being resharpened.

Straight flute reamers are the most common and are used in general purpose though-hole applications. They are used for reaming holes without interrupted cuts.

High speed steel (HSS) provides good wear resistance and can be used in general purpose applications for both ferrous and nonferrous materials.

Bright provides a smooth, polished finish on the tool. It increases chip flow in softer materials such as aluminum, wood and plastic.

Product Specifications

Reamer Diameter (Inch) 11/16

Reamer Diameter (Decimal Inch) 0.6875

Shank Type Straight

Variable Diameter Reamer Type Expansion

Flute Type Straight

Flute Length (Inch) 3

Overall Length (Inch) 7

Number of Flutes 6

Reamer Material High Speed Steel

Reamer Finish/Coating Bright

Maximum Expansion (Decimal Inch) 0.0060

Cutting Direction Right Hand

Product Specifications
Reamer Diameter (Inch)	11/16
Reamer Diameter (Decimal Inch)	0.6875
Shank Type	Straight
Variable Diameter Reamer Type	Expansion
Flute Type	Straight
Flute Length (Inch)	3
Overall Length (Inch)	7
Number of Flutes	6
Reamer Material	High Speed Steel
Reamer Finish/Coating	Bright
Maximum Expansion (Decimal Inch)	0.0060
Cutting Direction	Right Hand

$111.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - Shell Reamer

Item #: 65641383
Brand: DORMER
Model #: 0054222

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Product Specifications

Arbor Model Number Compatibility B956

Number of Flutes 10

Cutting Direction Right Hand

Reamer Material Cobalt

Product Specifications
Arbor Model Number Compatibility	B956
Number of Flutes	10
Cutting Direction	Right Hand
Reamer Material	Cobalt

$563.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Roughing & Finishing End Mills; Mill Diameter (mm): 1.5; Number Of Flutes: 3; End Mill Material: Solid Carbide; Length of Cut (mm): 2.00; Coating/Finish: AlTiN

Item #: 17694878
Brand: Kennametal
Model #: 6415926

Product Specifications

Mill Diameter (mm) 1.5

Number Of Flutes 3

End Mill Material Solid Carbide

Length of Cut (mm) 2.00

Coating/Finish AlTiN

Centercutting Yes

End Type Single

Flute Direction Right Hand

Extended Reach Yes

Mill Diameter (Decimal Inch) 0.0591

Length of Cut (Decimal Inch) 0.0787

Shank Type Straight-Cylindrical

Shank Diameter (mm) 3.00

Shank Diameter (Decimal Inch) 0.1181

Variable Helix No

Helix Angle 30

Reach Length (Decimal Inch) 0.0787

Reach Length (mm) 2.00

Material Grade KCPM15

Cutting Direction Right Hand

UNSPSC Code 27112803

$58.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - Shell Reamer

Item #: 65641466
Brand: DORMER
Model #: 0054147

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Product Specifications

Arbor Model Number Compatibility B956

Number of Flutes 10

Cutting Direction Right Hand

Reamer Material Cobalt

Product Specifications
Arbor Model Number Compatibility	B956
Number of Flutes	10
Cutting Direction	Right Hand
Reamer Material	Cobalt

$489.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Abrasive Bur: KEL-Z6.FS.6.0.55, 6.00 mm Cut Dia, Diamond Pattern

Item #: 01023746
Brand: WNT
Model #: 50923406

Product Specifications

Industry Specification KEL-Z6.FS.6.0.55

Cutting Diameter (mm) 6.00

Tooth Style Diamond Pattern

Overall Length (mm) 55.0000

Length of Cut (mm) 20.0000

Shank Diameter (mm) 3.0000

Head Material Solid Carbide

Head Coating Uncoated

Included Angle 12.00

UNSPSC Code 27112809

$16.65

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - Shell Reamer

Item #: 65641441
Brand: DORMER
Model #: 0054161

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.

Product Specifications

Arbor Model Number Compatibility B956

Number of Flutes 10

Cutting Direction Right Hand

Reamer Material Cobalt

Product Specifications
Arbor Model Number Compatibility	B956
Number of Flutes	10
Cutting Direction	Right Hand
Reamer Material	Cobalt

$445.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Mill Diameter (mm)	1.5
Number Of Flutes	3
End Mill Material	Solid Carbide
Length of Cut (mm)	2.00
Coating/Finish	AlTiN
Centercutting	Yes
End Type	Single
Flute Direction	Right Hand
Extended Reach	Yes
Mill Diameter (Decimal Inch)	0.0591
Length of Cut (Decimal Inch)	0.0787
Shank Type	Straight-Cylindrical
Shank Diameter (mm)	3.00
Shank Diameter (Decimal Inch)	0.1181
Variable Helix	No
Helix Angle	30
Reach Length (Decimal Inch)	0.0787
Reach Length (mm)	2.00
Material Grade	KCPM15
Cutting Direction	Right Hand
UNSPSC Code	27112803

Industry Specification	KEL-Z6.FS.6.0.55
Cutting Diameter (mm)	6.00
Tooth Style	Diamond Pattern
Overall Length (mm)	55.0000
Length of Cut (mm)	20.0000
Shank Diameter (mm)	3.0000
Head Material	Solid Carbide
Head Coating	Uncoated
Included Angle	12.00
UNSPSC Code	27112809