Lighting & Electrical > Conduits Ducts & Routing (ET04) - (3790 Products)
Lighting & Electrical > Conduits Ducts & Routing (ET04)
3/4-2FL-SE-REG w/.025R TiCN
Item #: MW21204603311
Brand: Monster Tool Company
Model #: 204-603311
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Corner Radius (RE) | 0.025″ |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 4″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | TiCN |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
NO. 5 90° CNTR DRILL AlTiN
Item #: MW23300003007B
Brand: Monster Tool Company
Model #: 300-003007B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #5 |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | Hard Steel |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #5 |
| Length Group | Regular |
| Point Angle (SIG) | 90 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Series/List # | 300 |
| Overall Length (OAL) | 2-3/4″ |
| Grade | C-2 Sub-Micron |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Single / Double End | Double End |
| Coating | AlTiN |
| End Shape | 90° Body with 118° Pilot |
| Cutting Edge Material | Solid Tungsten Carbide |
| Pilot Drill Diameter (PDD) | 3/16″ |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SN-7 INV CONE S/C
Item #: MW17310001230
Brand: Monster Tool Company
Model #: 310-001230
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 5/8″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Single Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2-3/8″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Point Angle (SIG) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Single / Double End | Single End |
| End Shape | Inverted Cone |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13/64 SPR FL RHC REAMER
Item #: MW20550001013
Brand: Monster Tool Company
Model #: 550-001013
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 13/64″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1″ |
| Measurement Type | Fractional |
| Cutting Edge Length (L) | 1″ |
| Series/List # | 550 |
| Connection Diameter Machine Side (DCONMS) | 13/46″ |
| Decimal Equivalent | 0.2031″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 10 Degrees |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1320 ST FL RHC REAMER
Item #: MW205000001320
Brand: Monster Tool Company
Model #: 500-0001320
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.132″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 3/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 3/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.132″ |
| Decimal Equivalent | 0.132″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13/64 CARB TWIST DRILL TiN
Item #: MW23450102031A
Brand: Monster Tool Company
Model #: 450-102031A
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13/64″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 13/64″ |
| Grade | C-2 Sub-Micron |
| Decimal Equivalent | 0.2031″ |
| Point Shape | Drill Point |
| Length Group | Jobber |
| Measurement Type | Inch |
| Coating | TiN |
| Series/List # | 450 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Length Chip Flute (LCF) | 1-3/4″ |
| Application | | Drilling | |
| Overall Length (OAL) | 3″ |
| Connection Diameter Machine Side (DCONMS) | 13/64″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 118 Degrees |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 25 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
05764 ER40 RIGID TAP COL:
Item #: GM7005764
Brand: Techniks
Model #: 05764
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Shank Size (SS) | ER40 |
| Shank Type | ER40 |
| Usable Length (LU) | 46 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-3FL-SE-42° AVAL-CR LG w/.090R (2x4)
Item #: MW21283502003
Brand: Monster Tool Company
Model #: 283-502003
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3159 ST FL RHC REAMER
Item #: MW205000003159
Brand: Monster Tool Company
Model #: 500-0003159
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3159″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.3159″ |
| Decimal Equivalent | 0.3159″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-4FL-SE-EXT-X/LG 1-1/2x6 TiN
Item #: MW21218001101A
Brand: Monster Tool Company
Model #: 218-001101A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 6″ |
| Length Group | Extended Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | TiN |
| Series/List # | 218 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1792 ST FL RHC REAMER
Item #: MW205000001792
Brand: Monster Tool Company
Model #: 500-0001792
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1792″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1792″ |
| Decimal Equivalent | 0.1792″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SB-3L (1LOC) S/C
Item #: MW17310001939
Brand: Monster Tool Company
Model #: 310-001939
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 1″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Single Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2-3/4″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | Carbide |
| Grade | C-2 Sub-Micron |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
| Coating | Bright |
| Length Group | Regular |
| End Shape | Cylinder with End Cut |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4123 ST FL RHC REAMER
Item #: MW205000004123
Brand: Monster Tool Company
Model #: 500-0004123
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4123″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4123″ |
| Decimal Equivalent | 0.4123″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0896 ST FL RHC REAMER
Item #: MW205000000896
Brand: Monster Tool Company
Model #: 500-0000896
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0896″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0896″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0896″ |
| Overall Length (OAL) | 2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.6mm ST FL RHC REAMER
Item #: MW20500004006.6
Brand: Monster Tool Company
Model #: 500-004006.6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6.6 mm |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 29 mm |
| Measurement Type | Metric |
| Cutting Edge Length (L) | 29 mm |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 6.6 mm |
| Decimal Equivalent | 0.2598″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 83 mm |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SJ-42 60° SINGLE END S/C
Item #: MW17310001160
Brand: Monster Tool Company
Model #: 310-001160
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 3/32″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Single Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Point Angle (SIG) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Single / Double End | Single End |
| End Shape | Cone |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-4FL-SE-STUB BN TiN
Item #: MW21220001141
Brand: Monster Tool Company
Model #: 220-001141
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | Stub |
| Overall Length (OAL) | 3″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | TiN |
| Series/List # | 220 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-3FL-SE-REG TiN
Item #: MW21205001231
Brand: Monster Tool Company
Model #: 205-001231
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | TiN |
| Series/List # | 205 |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1141 ST FL RHC REAMER
Item #: MW205000001141
Brand: Monster Tool Company
Model #: 500-0001141
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1141″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 5/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 5/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1141″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.1141″ |
| Overall Length (OAL) | 2-1/4″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
21/64-4FL-SE-REG BN
Item #: MW21223001084
Brand: Monster Tool Company
Model #: 223-001084
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 21/64″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | Regular |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3281″ |
| Coating | Bright |
| Series/List # | 223 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It