Lighting & Electrical > Electrical Circuit Protection (ET04) - (3748 Products)

Sort by

Pry Bars; Prybar Type: Shoulder Pattern; Overall Length Range: 3 to 4.9; End Style: Curved; Material: Steel; Bar Shape: Square; Overall Thickness: 0.79; Overall Length (mm): 95.25

Item #: 75610410
Brand: Williams
Model #: EB-24T

Product Specifications

Prybar Type Shoulder Pattern

Overall Length Range 3 to 4.9

End Style Curved

Material Steel

Bar Shape Square

Overall Thickness 0.79

Overall Length (mm) 95.25

Overall Length (Inch) 3-3/4

Overall Width 0.79

Color Silver

Insulated No

Features Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Eyebolt shanks should never be undercut or eyebolt shank diameters reduced Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load

Stock Size 3/4

Tip Width (Inch) 7/16

UNSPSC Code 27112502

Country of Origin UNITED STATES

$6.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Prybar Type	Shoulder Pattern
Overall Length Range	3 to 4.9
End Style	Curved
Material	Steel
Bar Shape	Square
Overall Thickness	0.79
Overall Length (mm)	95.25
Overall Length (Inch)	3-3/4
Overall Width	0.79
Color	Silver
Insulated	No
Features	Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage Each lot is tested and inspected to insure conformance to specifications Available with UNC Class 2A thread only Eyebolt shanks should never be undercut or eyebolt shank diameters reduced Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Stock Size	3/4
Tip Width (Inch)	7/16
UNSPSC Code	27112502
Country of Origin	UNITED STATES