Lighting & Electrical > Wire & Cable (ET04) - (1766 Products)
Lighting & Electrical > Wire & Cable (ET04)
Ballnose End Mill; 1/16″ Dia. × 1/8″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 4 FL, Carbide, AlTiN
Item #: TA15TC11704
Brand: Titan USA
Model #: TC11704
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Corner Radius (RE) | 1/32″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0625″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
$12.85
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
TANDEM WTG 160 Vise Jaw, 90 mm Jaw Width, 76 mm Jaw Length, 36 mm Jaw Height, 76 mm Overall Length
Item #: HF80402312
Brand: SCHUNK
Model #: 402312
| Product Specifications | |
|---|---|
| Type | Vise Jaw |
| Overall Length | 76 mm |
| Jaw Width | 90 mm |
| Model No | WTG 160 |
| Jaw Length | 76 mm |
| Weight | 6.61 |
| Jaw Height | 36 mm |
$1,110.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000270 LLDPE, Can Liner, 42X48, 56 gallon, 1.0 MIL, Clear, Roll
Item #: RC0178000270
Brand: Right Choice
Model #: 78000270
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 42″ |
| Material | Low Density |
| Width | 48″ |
| Capacity | 56 gallon |
| Bag Closure Type | No Closure |
| Thickness | 1.0 mil |
| PackSize | 1.00 |
| Color | Clear |
| Standard Pack | 150 per case |
$88.61
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 5/8″ Dia. × 3″ LOC × 5/8″ Shank Dia. × 6″ OAL, 4 FL, Carbide, TiCN
Item #: TA15TC98540
Brand: Titan USA
Model #: TC98540
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 3″ |
| Depth of Cut Maximum (APMX) | 3″ |
| Corner Radius (RE) | 5/16″ |
| Overall Length (OAL) | 6″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | TiCN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
$165.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It