Lighting & Electrical > Wire Management (ET04) - (3369 Products)
Lighting & Electrical > Wire Management (ET04)
.4652 ST FL RHC REAMER
Item #: MW205000004652
Brand: Monster Tool Company
Model #: 500-0004652
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4652″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4652″ |
| Decimal Equivalent | 0.4652″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000150 LLDPE, Can Liner, 30X36, 20/30 gallon, 0.9 MIL, White, Roll
Item #: RC0178000150
Brand: Right Choice
Model #: 78000150
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 30″ |
| Material | Low Density |
| Width | 36″ |
| Capacity | 20-30 gallon |
| Bag Closure Type | No Closure |
| Thickness | 0.9 mil |
| PackSize | 1.00 |
| Color | White |
| Standard Pack | 200 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000149 LLDPE, Can Liner, 30X36, 20/30 gallon, 0.7 MIL, Clear, Roll
Item #: RC0178000149
Brand: Right Choice
Model #: 78000149
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 30″ |
| Material | Low Density |
| Width | 36″ |
| Capacity | 20-30 gallon |
| Bag Closure Type | No Closure |
| Thickness | 0.7 mil |
| PackSize | 1.00 |
| Color | Clear |
| Standard Pack | 250 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/64-4FL-SE-REG AlTiN
Item #: MW21206001015
Brand: Monster Tool Company
Model #: 206-001015
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/64″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.0469″ |
| Coating | AlTiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000148 LLDPE, Can Liner, 30X36, 20/30 gallon, 0.7 MIL, Black, Roll
Item #: RC0178000148
Brand: Right Choice
Model #: 78000148
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 30″ |
| Material | Low Density |
| Width | 36″ |
| Capacity | 20-30 gallon |
| Bag Closure Type | No Closure |
| Thickness | 0.7 mil |
| PackSize | 1.00 |
| Color | Black |
| Standard Pack | 250 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000147 LLDPE, Can Liner, 30X36, 20/30 gallon, 0.7 MIL, Green Tint, Roll
Item #: RC0178000147
Brand: Right Choice
Model #: 78000147
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 30″ |
| Material | Low Density |
| Width | 36″ |
| Capacity | 20-30 gallon |
| Bag Closure Type | No Closure |
| Thickness | 0.7 mil |
| PackSize | 1.00 |
| Color | Green Tint |
| Standard Pack | 250 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000145 LLDPE, Can Liner, 30X36, 20/30 gallon, 0.5 MIL, White, Roll
Item #: RC0178000145
Brand: Right Choice
Model #: 78000145
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 30″ |
| Material | Low Density |
| Width | 36″ |
| Capacity | 20-30 gallon |
| Bag Closure Type | No Closure |
| Thickness | 0.5 mil |
| PackSize | 1.00 |
| Color | White |
| Standard Pack | 250 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-2FL-90° DRILL MILL
Item #: MW23208000625
Brand: Monster Tool Company
Model #: 208-000625
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Series/List # | 208 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Coating | Bright |
| Flute Count (NOF) | 2 |
| Grade | C-2 Sub-Micron |
| Decimal Equivalent | 0.625″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Drill Point |
| Overall Length (OAL) | 3-1/2″ |
| Single / Double End | Single End |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Point Angle (SIG) | 90 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.045-2FL-SE-REG-BALL
Item #: MW21250320045
Brand: Monster Tool Company
Model #: 250-320045
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.045″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.135″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.045″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.022-2FL-SE-REG-BALL-AlTiN
Item #: MW21250320022B
Brand: Monster Tool Company
Model #: 250-320022B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.022″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.066″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.022″ |
| Coating | TiAlN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4644 ST FL RHC REAMER
Item #: MW205000004644
Brand: Monster Tool Company
Model #: 500-0004644
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4644″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4644″ |
| Decimal Equivalent | 0.4644″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4643 ST FL RHC REAMER
Item #: MW205000004643
Brand: Monster Tool Company
Model #: 500-0004643
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4643″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4643″ |
| Decimal Equivalent | 0.4643″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10 CARB ST FL DRILL
Item #: MW23470301935
Brand: Monster Tool Company
Model #: 470-301935
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #10 |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #10 |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | Bright |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-3/16″ |
| Connection Diameter Machine Side (DCONMS) | 0.1935″ |
| Overall Length (OAL) | 2-1/4″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-3/16″ |
| Single / Double End | Single End |
| Cutting Edge Material | Solid Tungsten Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
254.32-16 ER32 SS RIGID T
Item #: TG622543216
Brand: Techniks
Model #: 254.32-16
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 16 mm |
| Shank Size (SS) | ER32 |
| Connection Diameter Minimum Workpiece Side (DCONNWS) | 16 mm |
| Tool Type | Collet |
| Connection Diameter Maximum Workpiece Side (DCONXWS) | 16 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
254.32-15 ER32 SS RIGID T
Item #: TG622543215
Brand: Techniks
Model #: 254.32-15
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 15 mm |
| Shank Size (SS) | ER32 |
| Connection Diameter Minimum Workpiece Side (DCONNWS) | 15 mm |
| Tool Type | Collet |
| Connection Diameter Maximum Workpiece Side (DCONXWS) | 15 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-2FL-SE-XX/LG 4x7 AlTiN
Item #: MW21216001099B
Brand: Monster Tool Company
Model #: 216-001099B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Application | | Slotting | Profiling | Plunging | |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 4″ |
| Decimal Equivalent | 1″ |
| Overall Length (OAL) | 7″ |
| Series/List # | 216 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.08″ Dia. × 0.12″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC55923
Brand: Titan USA
Model #: TC55923
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.08″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.65″ |
| Depth of Cut Maximum (APMX) | 0.12″ |
| Corner Radius (RE) | 0.04″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L6230 - 7.5 mm Dia. × 20 mm LOC × 10 mm Shank Dia. × 65 mm OAL, 2 Flutes, HSSCo, Bright Coating, Square End Mill
Item #: NE100108072
Brand: Nachi America Inc
Model #: 0108072
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7.5 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 20 mm |
| End Shape | Square |
| Overall Length (OAL) | 65 mm |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | HSSCo |
| Tool Type | End Mill |
| Coating | Bright |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.035″ Dia. × 0.052″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC55472
Brand: Titan USA
Model #: TC55472
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.035″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.105″ |
| Depth of Cut Maximum (APMX) | 0.052″ |
| Corner Radius (RE) | 0.0175″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8x1-1/2 RH w/CR B-BAR (.100min. x .500max)
Item #: MW22601100500
Brand: Monster Tool Company
Model #: 601-100500
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Overhang Minimum (OHN) | 0.025″ |
| Maximum Bore Diameter (DMAX) | 0.1″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Minimum Bore Diameter (DMIN) | 1/2″ |
| Style | Corner Radius |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Coating | Bright |
| Series/List # | 601 |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.004″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It