Motion Control & Fluid Power > Motors (ET04) - (6201 Products)
Motion Control & Fluid Power > Motors (ET04)
Ballnose End Mill; 1/2″ Dia. × 3″ LOC × 1/2″ Shank Dia. × 6″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC18333
Brand: Titan USA
Model #: TC18333
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 3″ |
| Depth of Cut Maximum (APMX) | 3″ |
| Corner Radius (RE) | 1/4″ |
| Overall Length (OAL) | 6″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
$96.47
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.03″ Dia. × 0.15″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC52918
Brand: Titan USA
Model #: TC52918
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.03″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.45″ |
| Depth of Cut Maximum (APMX) | 0.15″ |
| Corner Radius (RE) | 0.015″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
$51.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It