Motion Control & Fluid Power Products - Bearings For Sale | Caliber Tooling - (8548 Products)
SKF - 40mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 18mm Wide, 1 Row, Round Bore, 24,000 Lb Static Capacity, 36,500 Lb Dynamic Capacity
Item #: 45669132
Brand: SKF
Model #: 7208 BECBP
Exact Tooling IR#: 04
Features and Benefits
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Angular Contact |
| Style | Open |
| Bore Diameter (mm) | 40.00 |
| Outside Diameter (mm) | 80.00 |
| Outside Diameter (Decimal Inch) | 3.1500 |
| Width (Decimal Inch) | 0.7100 |
| Width (mm) | 18.00 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Contact Angle | 40 |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 24000 |
| Dynamic Load Capacity (Lb.) | 36500 |
| Cage Material | Plastic |
| Maximum RPM | 9000 |
$168.89
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SKF - 12mm Bore Diam, 24mm OD, Double Seal Thin Section Radial Ball Bearing - 6mm Wide, 1 Row, Round Bore, 220 Lb Static Capacity, 506 Lb Dynamic Capacity
Item #: 78054376
Brand: SKF
Model #: 61901-2RS1
Exact Tooling IR#: 04
Features and Benefits
Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Thin Section |
| Style | Double Seal |
| Bore Diameter (mm) | 12.00 |
| Outside Diameter (mm) | 24.00 |
| Width (mm) | 6.00 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 220 |
| Dynamic Load Capacity (Lb.) | 506 |
$98.43
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SKF - 25mm Bore Diam, 42mm OD, Open Thin Section Radial Ball Bearing - 9mm Wide, 1 Row, Round Bore, 899 Lb Static Capacity, 1,490 Lb Dynamic Capacity
Item #: 78057106
Brand: SKF
Model #: 61905
Exact Tooling IR#: 04
Features and Benefits
Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Thin Section |
| Style | Open |
| Bore Diameter (mm) | 25.00 |
| Outside Diameter (mm) | 42.00 |
| Width (mm) | 9.00 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 899 |
| Dynamic Load Capacity (Lb.) | 1490 |
$84.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Value Collection - 1" ID, 5-5/32" OAL x 1-13/32" OAH 2-Bolt Flange Mounted Bearing - 1,764 Lb Static Cap, 3,147 Lb Dyn Cap, 3-57/64" Btw Mnt Hole Ctrs, 5/8" Base-to-Ctr Ht, Thermoplastic
Item #: 69973485
Brand: Value Collection
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | 2 Bolt Flange Mounted Bearing |
| Inside Diameter (Decimal Inch) | 1.0000 |
| Inside Diameter (Inch) | 1 |
| Width (Inch) | 2-3/4 |
| Width (Decimal Inch) | 2.7500 |
| Overall Length (Inch) | 5-5/32 |
| Overall Length (Decimal Inch) | 5.1563 |
| Overall Height (Inch) | 1-13/32 |
| Overall Height (Decimal Inch) | 1.4063 |
| Static Load Capacity (Pounds) | 1764.00 |
| Dynamic Load Capacity (Pounds) | 3147 |
| Distance Between Mounting Hole Centers (Decimal Inch) | 3.8906 |
| Distance Between Mounting Hole Centers (Inch) | 3-57/64 |
| Material | Thermoplastic Housing with Zinc Chromate Plated Bearing Insert |
| Distance Between Base And Center (Decimal Inch) | 0.6250 |
| Distance Between Base And Center (Inch) | 5/8 |
| Lock Type | Set Screw |
| Bolt Size (Inch) | 7/16 |
| Bolt Size (Decimal Inch) | 0.4375 |
$66.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Tritan - 100mm Bore Diam, 150mm OD, Double Seal Deep Groove Radial Ball Bearing - 24mm Wide, 1 Row, Round Bore, 12,200 Lb Static Capacity, 14,200 Lb Dynamic Capacity
Item #: 35434133
Brand: Tritan
Model #: 6020 2RSC3 PRX
Exact Tooling IR#: 04
Features and Benefits
Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Deep Groove |
| Style | Double Seal |
| Bore Diameter (mm) | 100.00 |
| Outside Diameter (mm) | 150.00 |
| Width (mm) | 24.00 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 12200 |
| Static Load Capacity (Nm) | 54268 |
| Dynamic Load Capacity (Lb.) | 14200 |
| Dynamic Load Capacity (Nm) | 63165 |
| Bearing Number | 6018 |
$122.35
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Quick-Change Disc: Type S, 2" Dia, 36 Grit, Ceramic Alumina, Coated
Item #: 77406346
Brand: ARC Abrasives
Model #: 71-38202
Product Specifications
| Disc Diameter | 2 |
| Abrasive Type | Coated |
| Abrasive Material | Ceramic Alumina |
| Grit | 36 |
| Grade | Extra Coarse |
| Quick Change Compatibility | Type S |
| Attaching System | TS (Type II) |
| Disc Color | Gray |
| Series | PREDATOR |
| Backing Material | Cloth |
| Maximum Rpm | 30000 |
| Trimmable | No |
| Flexibility | Flexible |
| UNSPSC Code | 31191506 |
| Country of Origin | South Korea |
$1.68
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 3 Flute, Solid Carbide
Item #: 75512434
Brand: WNT
Model #: 5361815400
Product Specifications
| Mill Diameter (mm) | 15.00 |
| Mill Diameter (Decimal Inch) | 0.6000 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 65.00 |
| Shank Diameter (mm) | 16.00 |
| Overall Length (mm) | 180.00 |
| Single Or Double End | Single |
| Coating/Finish Family | DLC |
| Centercutting | No |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Coolant Through | No |
| Helix Angle | 45 |
| Coating/Finish | DLC |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Spiral |
| Shank Type | Weldon Flat |
| System Of Measurement | Metric |
| UNSPSC Code | 27112803 |
| Country of Origin | Germany |
$267.61
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Browning - 1-3/4" ID, 5-5/8" OAL x 5-5/8" OAH 4-Bolt Flange - 5,216 Lb Static Cap, 7,889 Lb Dyn Cap, 4-3/8" Btw Mnt Hole Ctrs, Cast Iron
Item #: 04716825
Brand: Browning
Model #: VF4S-328
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | 4-Bolt Flange |
| Inside Diameter (Inch) | 1-3/4 |
| Width (Inch) | 2-5/32 |
| Overall Length (Inch) | 5-5/8 |
| Overall Height (Inch) | 5-5/8 |
| Static Load Capacity (Pounds) | 5216.00 |
| Dynamic Load Capacity (Pounds) | 7889 |
| Distance Between Mounting Hole Centers (Decimal Inch) | 4.3750 |
| Distance Between Mounting Hole Centers (Inch) | 4-3/8 |
| Material | Cast Iron |
| Insert Material | 52100 Steel |
| Lock Type | Set Screw |
| Bolt Size (Inch) | 9/16 |
$261.32
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Value Collection - 1-7/16" ID, 4-21/32" OAL x 1-27/32" OAH 4-Bolt Flange Mounted Bearing - 3,462 Lb Static Cap, 5,777 Lb Dyn Cap, 3-5/8" Btw Mnt Hole Ctrs, 27/32" Base-to-Ctr Ht, Thermoplastic
Item #: 69972644
Brand: Value Collection
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | 4 Bolt Flange Mounted Bearing |
| Inside Diameter (Decimal Inch) | 1.4375 |
| Inside Diameter (Inch) | 1-7/16 |
| Width (Inch) | 4.656 |
| Width (Decimal Inch) | 4.6563 |
| Overall Length (Inch) | 4-21/32 |
| Overall Length (Decimal Inch) | 4.6563 |
| Overall Height (Inch) | 1-27/32 |
| Overall Height (Decimal Inch) | 1.8438 |
| Static Load Capacity (Pounds) | 3462.00 |
| Dynamic Load Capacity (Pounds) | 5777 |
| Distance Between Mounting Hole Centers (Decimal Inch) | 3.6250 |
| Distance Between Mounting Hole Centers (Inch) | 3-5/8 |
| Material | Thermoplastic Housing with Zinc Chromate Plated Bearing Insert |
| Distance Between Base And Center (Decimal Inch) | 0.8438 |
| Distance Between Base And Center (Inch) | 27/32 |
| Lock Type | Set Screw |
| Bolt Size (Inch) | 1/2 |
| Bolt Size (Decimal Inch) | 0.5000 |
$109.07
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
IKO - 1.024" Bore Diam, 3,450 Lb. Dynamic Capacity, Needle Roller Bearing - High Performance, 1.339" Outside Diam, 0.63" Wide
Item #: 09018086
Brand: IKO
Model #: TAF263416
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | Needle Roller Bearing |
| Bore Diameter (Decimal Inch) | 1.0240 |
| Bore Diameter (mm) | 26.000 |
| Outside Diameter (Decimal Inch) | 1.3390 |
| Outside Diameter (mm) | 34.0000 |
| Width (Decimal Inch) | 0.6300 |
| Width (mm) | 16.00 |
| Dynamic Load Capacity (Pounds) | 3450 |
| Style. | High Performance |
$37.91
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1573; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 67891515
Brand: GSG
Model #: GSG-CR-1.1573C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00003 |
| Blank Number Wire Size | #5 |
| Inner Diameter (Decimal Inch) | 1.1573 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00003 |
| Blank Number Wire Size | #5 |
| Inner Diameter (Decimal Inch) | 1.1573 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| MSC Part # | 67891515 |
| Mfr Part # | GSG-CR-1.1573C |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$1,198.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Extra Length Drill Bit: 0.4882", 140 °, Carbide
Item #: 96793294
Brand: Mitsubishi
Model #: 696829
Product Specifications
| Drill Bit Size (mm) | 12.40 |
| Overall Length (mm) | 130.3000 |
| Tool Material | Carbide |
| Coating/Finish | TiAlN |
| Coolant Through | Yes |
| Flute Type | Helical |
| Shank Type | Cylindrical |
| Drill Point Angle | 140 |
| Flute Length (mm) | 64.80 |
| Point Type | X-Thinning |
| Series | MVS |
| Cutting Direction | Right Hand |
| Tool Application | Drilling; Cross Hole; Stack Drilling |
| Spiral Type | Right Hand |
| Number Of Flutes | 2 |
| Web Thinning | X-Thinned |
| Web Configuration | Parallel |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Bronze; Aluminum; Brass; Carbon Steel; Iron; Aluminum Alloy; Steel; High Strength Bronze; Tempered Steel; Stainless Steel; Cast Iron; Structural Steel; Superalloys & Titanium; Copper; Hardened Steel |
| Secondary Workpiece Material Code | P; K; M; N |
| Drill Bit Grade | High Precision; High Performance |
| Drill Bit Size (Decimal Inch) | 0.4882 |
| Drill Point Length (mm) | 2.30 |
| Drill Point Length (Decimal Inch) | 0.0906 |
| Overall Length (Decimal Inch) | 5.1299 |
| Shank Diameter (Decimal Inch) | 0.5512 |
| Shank Diameter (mm) | 14.0000 |
| Shank Length (Decimal Inch) | 2.4803 |
| Shank Length (mm) | 63.000 |
| Flute Length (Decimal Inch) | 2.5512 |
| Flute By Diameter Ratio | 3xD |
| Maximum Drilling Depth (Decimal Inch) | 1.5551 |
| Maximum Drilling Depth (mm) | 39.50 |
| Specification Designation | ISO |
| UNSPSC Code | 23241637 |
| Country of Origin | VARIOUS |
$317.54
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Value Collection - 1-1/4" ID, 6-1/2" OAL x 3-5/16" OAH Pillow Block - 2,540 Lb Static Cap, 4,383 Lb Dyn Cap, 4-3/4" Btw Mnt Hole Ctrs, 1-11/16" Base-to-Ctr Ht, Cast Iron
Item #: 69972826
Brand: Value Collection
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | Pillow Block |
| Inside Diameter (Decimal Inch) | 1.2500 |
| Inside Diameter (Inch) | 1-1/4 |
| Width (Decimal Inch) | 1.8750 |
| Overall Length (Inch) | 6-1/2 |
| Overall Length (Decimal Inch) | 6.5000 |
| Overall Height (Inch) | 3-5/16 |
| Overall Height (Decimal Inch) | 3.3125 |
| Static Load Capacity (Pounds) | 2540.00 |
| Dynamic Load Capacity (Pounds) | 4383 |
| Distance Between Mounting Hole Centers (Decimal Inch) | 4.7500 |
| Distance Between Mounting Hole Centers (Inch) | 4-3/4 |
| Material | Cast Iron housing with Chrome Carbon Steel Bearings |
| Distance Between Base And Center (Decimal Inch) | 1.6875 |
| Distance Between Base And Center (Inch) | 1-11/16 |
| Lock Type | Concentric |
| Bolt Size (Inch) | 1/2 |
| Bolt Size (Decimal Inch) | 0.5000 |
$43.89
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
IKO - 1" Bore Diam, 2,850 Lb. Dynamic Capacity, 1 x 1-1/4 x 1/2", Caged, Open End, Shell Needle Roller Bearing - 1-1/4" Outside Diam, 1/2" Wide
Item #: 09016858
Brand: IKO
Model #: BA168ZOH
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | 1X1.25X0.5" CAGED SHELL-NEEDLE ROLLER-OPEN |
| Bore Diameter (Decimal Inch) | 1.0000 |
| Bore Diameter (mm) | 25.000 |
| Outside Diameter (Decimal Inch) | 1.2500 |
| Outside Diameter (mm) | 31.8000 |
| Width (Decimal Inch) | 0.5000 |
| Width (mm) | 12.70 |
| Dynamic Load Capacity (Pounds) | 2850 |
| Style. | Shell Needle |
$10.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SKF - 1/2" Bore Diam, 1-1/8" OD, Double Shield Deep Groove Radial Ball Bearing - 5/16" Wide, 1 Row, Round Bore, 540 Lb Static Capacity, 912 Lb Dynamic Capacity
Item #: 87515011
Brand: SKF
Model #: R8FFST
Exact Tooling IR#: 04
Features and Benefits
Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Deep Groove |
| Style | Double Shield |
| Bore Diameter (Decimal Inch) | 0.5000 |
| Outside Diameter (Decimal Inch) | 1.1250 |
| Width (Decimal Inch) | 0.3125 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Housing Material | Stainless Steel |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 540 |
| Static Load Capacity (Nm) | 2400 |
| Dynamic Load Capacity (Lb.) | 912 |
| Dynamic Load Capacity (Nm) | 5070 |
| ABEC Scale | ABEC-1 |
| Maximum RPM | 24000 |
$96.46
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SKF - 15mm Bore Diam, 42mm OD, Open Angular Contact Radial Ball Bearing - 13mm Wide, 1 Row, Round Bore, 6,700 Lb Static Capacity, 13,000 Lb Dynamic Capacity
Item #: 45670106
Brand: SKF
Model #: 7302 BECBP
Exact Tooling IR#: 04
Features and Benefits
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
| Product Specifications | |
|---|---|
| Type | Angular Contact |
| Style | Open |
| Bore Diameter (mm) | 15.00 |
| Outside Diameter (mm) | 42.00 |
| Outside Diameter (Decimal Inch) | 1.6500 |
| Width (Decimal Inch) | 0.5100 |
| Width (mm) | 13.00 |
| Flange Type | Without Flange |
| Number of Rows | 1 |
| Bore Type | Round |
| Contact Angle | 40 |
| Snap Ring Included | Without Snap Ring |
| Static Load Capacity (Lb.) | 6700 |
| Dynamic Load Capacity (Lb.) | 13000 |
| Cage Material | Plastic |
| Maximum RPM | 20000 |
$97.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Thomson Industries - 5/8" Diam, Stainless Steel Bearing Closed External Seal for Fixed Diameter Housings - 1/8" Wide x 1.129" Outside Diam
Item #: 02730745
Brand: Thomson Industries
Model #: S625SS
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type. | Closed External Seal for Fixed Diameter Housings |
| Material | Stainless Steel |
| Width (Decimal Inch) | 0.1250 |
| Outside Diameter (Decimal Inch) | 1.1290 |
$32.15
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Thomson Industries - 3/4" Diam, Steel Bearing Closed External Seal for Fixed Diameter Housings - 1/8" Wide x 1.254" Outside Diam
Item #: 02730752
Brand: Thomson Industries
Model #: S750
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type. | Closed External Seal for Fixed Diameter Housings |
| Material | Steel |
| Width (Decimal Inch) | 0.1250 |
| Outside Diameter (Decimal Inch) | 1.2540 |
$12.95
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 0.60 mm Dia, 0.90 mm LOC, 2 Flute, Solid Carbide
Item #: 86505872
Brand: Mitsubishi
Model #: 10482209
Product Specifications
| Mill Diameter (Decimal Inch) | 0.0236 |
| Mill Diameter (mm) | 0.60 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (mm) | 0.90 |
| Coating/Finish | AlTiCrN |
| Extended Reach | No |
| Variable Helix | No |
| Variable Index | No |
| Helix Angle | 30 |
| Overall Length (Decimal Inch) | 1.7717 |
| Overall Length (mm) | 45.00 |
| Chipbreaker | No |
| Undercutting | No |
| Length Type | Short |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Shank Diameter (mm) | 4.00 |
| Nose Radius (mm) | 0.30 |
| Nose Radius (Decimal Inch) | 0.0118 |
| Neck Length (Decimal Inch) | 0.0354 |
| Neck Length (mm) | 0.90 |
| Shank Diameter Tolerance | h5 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P; H |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Superalloys & Titanium; Titanium Alloy |
| Secondary Workpiece Material Code | S; M; N |
| Material Grade | Carbide |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | MP |
| Flute Type | Spiral |
| UNSPSC Code | 27112803 |
| Centercutting | Yes |
| Coating Classification | PVD |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Normal |
| Coolant Through | No |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.0354 |
| System Of Measurement | Metric |
| Country of Origin | Japan |
$39.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
IKO - 0.866" Bore Diam, Needle Roller Bearing Inner Ring - Precision Needle, 1.024" Outside Diam, 0.63" Wide
Item #: 09019431
Brand: IKO
Model #: LRT222616
Exact Tooling IR#: 04
| Product Specifications | |
|---|---|
| Type | Needle Roller Bearing - Inner Ring |
| Bore Diameter (Decimal Inch) | 0.8660 |
| Bore Diameter (mm) | 22.000 |
| Outside Diameter (Decimal Inch) | 1.0240 |
| Outside Diameter (mm) | 26.0000 |
| Width (Decimal Inch) | 0.6300 |
| Width (mm) | 16.00 |
| Dynamic Load Capacity (Pounds) | 0 |
| Style. | Precision Needle |
$13.12
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It