Raw Materials > Rubber & Foam (ET04) - (21944 Products)
Raw Materials > Rubber & Foam (ET04)
9.1 mm Dia. × 10 mm Shank Dia. × 136 mm OAL, 140 Degrees, 5xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880777101
Brand: Nachi America Inc
Model #: 0777101
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9.1 mm |
| Functional Length (LF) | 78 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 9.1 mm |
| Tool Type | Drill |
| Length Group | 5xD |
| Usable Length (LU) | 80 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 136 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9.03 mm Dia. × 9 mm Shank Dia. × 100 mm OAL, 150 Degrees, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880727740
Brand: Nachi America Inc
Model #: 0727740
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9.03 mm |
| Functional Length (LF) | 41 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 9.03 mm |
| Tool Type | Drill |
| Coating | Aqua Revo D |
| Usable Length (LU) | 43 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Overall Length (OAL) | 100 mm |
| Connection Diameter Machine Side (DCONMS) | 9 mm |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 150 Degrees |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
59 CARB STUB DRILL
Item #: MW23460300410
Brand: Monster Tool Company
Model #: 460-300410
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #59 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #59 |
| Tool Type | Drill |
| Length Group | Short/Stub |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Point Shape | Drill Point |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Measurement Type | Wire Gauge |
| Application | | Drilling | |
| Series/List # | 460 |
| Connection Diameter Machine Side (DCONMS) | 0.041″ |
| Length Chip Flute (LCF) | 1/2″ |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Point Angle (SIG) | 135 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 1/2″ |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 15 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.25″ (1/4) Shank DIA × 90° Included Angle × 2.5″ (2-1/2) Overall Length × 0.01″ Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, Uncoated
Item #: TA15TC85128
Brand: Titan USA
Model #: TC85128
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Point Angle (SIG) | 90 Degrees |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 1/8″ |
| Coating | Uncoated |
| Flute Count (NOF) | 2 |
| End Shape | Pointed |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-4FL FUSION-SE-XXLG 4x7
Item #: MW21284000336
Brand: Monster Tool Company
Model #: 284-000336
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Application | | Slotting | Profiling | Rampdown | Profile Cutting | |
| Depth of Cut Maximum (APMX) | 4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 7″ |
| Length Group | Double Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L6802 - M16 x2 mm × 4.331 mm OAL, D7, Spiral Point Tap
Item #: AC881542474
Brand: Nachi America Inc
Model #: 1542474
| Product Specifications | |
|---|---|
| Thread Size | M16 × 2 |
| Usable Length (LU) | 1.26 mm |
| Thread Diameter Size (TDZ) | M16 |
| Overall Length (OAL) | 4.331 mm |
| Thread Pitch (TP) | 2 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Thread Tolerance Class (TCTR) | | D7 | |
| Connection Diameter Machine Side (DCONMS) | 0.48 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill; 1/2″ Dia. × 1″ LOC × 1/2″ Shank Dia. × 3″ OAL ; 5 FL ; Carbide ; AlCr ; 0.03″ R
Item #: ER473902L050030
Brand: EMUGE-FRANKEN
Model #: 3902L.050030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Shank Type | HA |
| Depth of Cut Maximum (APMX) | 1″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
| Coating | AlCr |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L6802 - M14 x2 mm × 4.331 mm OAL, D7, Spiral Point Tap
Item #: AC881542468
Brand: Nachi America Inc
Model #: 1542468
| Product Specifications | |
|---|---|
| Thread Size | M14 × 2 |
| Usable Length (LU) | 1.26 mm |
| Thread Diameter Size (TDZ) | M14 |
| Overall Length (OAL) | 4.331 mm |
| Thread Pitch (TP) | 2 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Thread Tolerance Class (TCTR) | | D7 | |
| Connection Diameter Machine Side (DCONMS) | 0.429 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: USA Sealing / Part #: ZUSA-XPE-111
Item #: 95157178
Brand: USA Sealing
Model #: ZUSA-XPE-111Product Specifications
Cell Type
Closed
Material
Polyethylene
Thickness (Inch)
3/4
Length Type
Long
Firmness
Firm (14+ psi)
Shape
Rectangle
Backing Type
Acrylic Adhesive
Width (Inch)
24
Length (Inch)
48
Color
Black
Hardness
Firm
Texture
Smooth
Grade
Standard
Minimum Temperature (Deg F - 3 Decimals)
-40.000
Maximum Temperature (F) ( - 0 Decimals)
225.000
Tensile Strength (psi)
85.00
Standards
FMVSS302
Density (Lb./Cu. Ft.)
4
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: USA Sealing / Part #: BULK-RR-P95-5
Item #: 02332559
Brand: USA Sealing
Model #: BULK-RR-P95-5Product Specifications
Material
Urethane
Diameter (Inch)
3/4
Tensile Strength (psi)
5600.00
Color
Black
Minimum Temperature (Deg F - 3 Decimals)
0.000
Maximum Temperature (F) ( - 0 Decimals)
200.000
Hardness
95A
Length
4
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.06″ Dia. × 1/2″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC52950
Brand: Titan USA
Model #: TC52950
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.06″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Corner Radius (RE) | 0.03″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L9717 - 1/4″ Dia. × 3/8″ LOC × 1/4″ Shank Dia. × 2″ OAL, 3 Flutes, Carbide, Bright Coating, Square End Mill
Item #: AC8841000309
Brand: Nachi America Inc
Model #: 41000309
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 3/8″ |
| End Shape | Square |
| Overall Length (OAL) | 2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Tool Type | End Mill |
| Coating | Bright |
| Decimal Equivalent | 0.25″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.075″ Dia. × 0.112″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC55592
Brand: Titan USA
Model #: TC55592
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.075″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.225″ |
| Depth of Cut Maximum (APMX) | 0.112″ |
| Corner Radius (RE) | 0.0375″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.06″ Dia. × 1/2″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC53898
Brand: Titan USA
Model #: TC53898
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.06″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/2″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Corner Radius (RE) | 0.03″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.1875″ (3/16) Shank DIA × 82° Included Angle × 2.5″ (2-1/2) Overall Length × 0.01″ Tip DIA Carbide Pointed Chamfer Mill, 2 Flutes, AlTiN Coated
Item #: TA15TC85314
Brand: Titan USA
Model #: TC85314
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Point Angle (SIG) | 82 Degrees |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Usable Length (LU) | 0.108″ |
| Coating | AlTiN |
| Flute Count (NOF) | 2 |
| End Shape | Pointed |
| Depth of Cut Maximum (APMX) | 0.108″ |
| Tool Type | Chamfer Mill |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SK-7 90° ANGLE S/C
Item #: MW17310001176
Brand: Monster Tool Company
Model #: 310-001176
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 3/8″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Single Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2-1/8″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Point Angle (SIG) | 90 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Single / Double End | Single End |
| End Shape | Cone |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.159″ Dia. × 0.159″ Shank Size × 2-1/8″ Flute Length × 12″ OAL, 135 Degrees, 2 Flute, Black Oxide, HSS, Split Point, Aircraft Extension Drill
Item #: TA15CD68121
Brand: Titan USA
Model #: CD68121
| Product Specifications | |
|---|---|
| ManufacturerNo | CD68121 |
| Flute Count (NOF) | 2 |
| Tool Diameter | 0.159″ |
| Angle | 135 Degrees |
| Connection Diameter Machine Side (DCONMS) | 0.159″ |
| Cutting Edge Material | HSS |
| Flute Length | 2-1/8″ |
| Point Shape | Split |
| Overall Length (OAL) | 12″ |
| Usable Length (LU) | 2-1/8″ |
| Coating | Black Oxide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Q CARB TWIST DRILL
Item #: MW23450203320
Brand: Monster Tool Company
Model #: 450-203320
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | Q |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | Q |
| Grade | C-2 Sub-Micron |
| Length Group | Jobber |
| Point Shape | Drill Point |
| Coating | Bright |
| Measurement Type | Letter |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Series/List # | 450 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.332″ |
| Overall Length (OAL) | 4″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 25 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4878 ST FL RHC REAMER
Item #: MW205000004878
Brand: Monster Tool Company
Model #: 500-0004878
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4878″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4878″ |
| Decimal Equivalent | 0.4878″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.06″ Dia. × 0.18″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC58815
Brand: Titan USA
Model #: TC58815
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.06″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.72″ |
| Depth of Cut Maximum (APMX) | 0.18″ |
| Corner Radius (RE) | 0.03″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It