Tapes & Adhesives > Tape (ET04) - (6378 Products)
Tapes & Adhesives > Tape (ET04)
Cordless Rotary Hammer: 18.00V, 1-1/4" Chuck
Item #: 96025846
Brand: Milwaukee Tool
Model #: 2916-20Product Specifications
For Bit Shank Type
SDS Plus
Chuck Size (Inch)
1-1/4
Maximum No-Load Blows per Minute
4650
Solid Bit Capacity
1.25 in
Voltage
18.00
Includes
(1) Rotary Hammer, (1) Side Handle, (1) Depth gauge
Overall Length (Decimal Inch)
18.3000
For Shank Diameter
1.25 in
UNSPSC Code
27112703
Country of Origin
China
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.055-4FL-SE-STUB-.015R
Item #: MW212506405515
Brand: Monster Tool Company
Model #: 250-6405515
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.055″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.083″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.055″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1686 ST FL RHC REAMER
Item #: MW205000001686
Brand: Monster Tool Company
Model #: 500-0001686
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1686″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1686″ |
| Decimal Equivalent | 0.1686″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It