Threading > Taps (ET04) - (129240 Products)
Threading > Taps (ET04)
3″ Diameter × 3/8″ Width, 320 Grit, Aluminum Oxide, 0.022″ Crimped Bristle, Wheel Brush
Item #: MJ74BMC30AY320A
Brand: Brush Research
Model #: BMC30AY320AO
| Product Specifications | |
|---|---|
| Diameter | 3″ |
| Trim Length | 0.812″ |
| Shank Diameter | 1/4″ |
| Grit | 320 |
| Width | 3/8″ |
| Maximum RPM | 25,000 |
| Abrasive Material | Aluminum Oxide |
| Thickness | 3/8″ |
| Bristle Diameter | 0.022″ |
| Standard Pack | 1 |
| Bristle Type | Crimped |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT 50 - 45 degree coolant pull stud
Item #: TE1221109C
Brand: Techniks
Model #: 21109-C
| Product Specifications | |
|---|---|
| Shank Size (SS) | 0.906″ |
| Coolant Supply Property (CSP) | Yes |
| Body Diameter (BD) | 0.906″ |
| Tool Type | Pull Stud |
| Connection Retention Knob Thread Size (CRKS) | 1″-8 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-4FL-SE-X/LG BN 3x6
Item #: MW21229001070
Brand: Monster Tool Company
Model #: 229-001070
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 3″ |
| Length Group | Extra Long |
| Overall Length (OAL) | 6″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | Bright |
| Series/List # | 229 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2369 ST FL RHC REAMER
Item #: MW205000002369
Brand: Monster Tool Company
Model #: 500-0002369
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2369″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2369″ |
| Decimal Equivalent | 0.2369″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1891 ST FL RHC REAMER
Item #: MW205000001891
Brand: Monster Tool Company
Model #: 500-0001891
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1891″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1891″ |
| Decimal Equivalent | 0.1891″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-4FL-SE-X/LG 3x6 TiN
Item #: MW21218001071
Brand: Monster Tool Company
Model #: 218-001071
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 3″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 6″ |
| Length Group | Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | TiN |
| Series/List # | 218 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Value Collection / Part #: 84617
Item #: 97062087
Brand: Value Collection
Model #: 84617
Specifications
 | |
| MSC Part # | 97062087 |
| Mfr Part # | 84617 |
| Country of OriginCountry of Origin is subject to change | Brazil |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3M Flexible Diamond Belt 6456J M20 Type YFB Pattern 18 White 2″ × 48″
Item #: 98634959
Brand: Seco
Model #: 10139635Product Specifications
Thread Size (Inch)
11/2-12
Chamfer
Modified Bottoming
Class Of Fit
2B
Number Of Flutes
4
Material
HSS-E
Threads per Inch
12
Thread Direction
Right Hand
Flute Direction
Right Hand
Coating/Finish
TN
Thread Depth (mm)
24.00
Coolant Through
No
Thread Length (mm)
24.00
Overall Length (mm)
170.0000
Thread Pitch (Decimal Inch)
0.0833
Thread Pitch (mm)
2.12
Thread Standard
UNF
Helix Angle
40.00
Oversize
No
Application
Blind Hole Threading
Shank Diameter (mm)
28.0000
Neck Length (mm)
77.00
Tapping Depth (mm)
101.00
Flute Style
Spiral
Material Application
Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel
Series
T32
Shank Length (mm)
69.000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4″ × 18″ - Medium - Surface Conditioning Belt Alt mfg # 888055
Item #: MM75888055
Brand: Standard Abrasives
Model #: 51115333456
| Product Specifications | |
|---|---|
| Width | 3/4″ |
| Color | Red |
| Length | 18″ |
| Standard Pack | 20 |
| Abrasive Material | Aluminum Oxide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Cutting Dia. 1/8″Shank Dia, 6 Flute, 100 Degrees, Carbide Countersink
Item #: TA15CS36908
Brand: Titan USA
Model #: CS36908
| Product Specifications | |
|---|---|
| Tool Type | Countersink |
| Point Angle (SIG) | 100 Degrees |
| Cutting Diameter (DC) | 1/8″ |
| Coating | Uncoated |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4.95 mm Dia., 135 Degrees, Jobber, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC860772357
Brand: Nachi America Inc
Model #: 0772357
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 4.95 mm |
| Point Angle (SIG) | 135 Degrees |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 4.95 mm |
| Tool Type | Drill |
| Length Group | Jobber |
| Flute Count (NOF) | 2 |
| Coating | Aqua Revo D |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4.93 mm Dia. × 5 mm Shank Dia. × 80 mm OAL, 150 Degrees, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880733105
Brand: Nachi America Inc
Model #: 0733105
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 4.93 mm |
| Functional Length (LF) | 22 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 4.93 mm |
| Tool Type | Drill |
| Coating | Aqua Revo D |
| Usable Length (LU) | 24 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Overall Length (OAL) | 80 mm |
| Connection Diameter Machine Side (DCONMS) | 5 mm |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 150 Degrees |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Cutting Dia. 1/8″Shank Dia, 3 Flute, 90 Degrees, Carbide Countersink
Item #: TA15CS33308
Brand: Titan USA
Model #: CS33308
| Product Specifications | |
|---|---|
| Tool Type | Countersink |
| Point Angle (SIG) | 90 Degrees |
| Cutting Diameter (DC) | 1/8″ |
| Coating | Uncoated |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4.9 mm Dia. × 6 mm Shank Dia. × 77 mm OAL, 135 Degrees, Jobber, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC860772340
Brand: Nachi America Inc
Model #: 0772340
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 4.9 mm |
| Functional Length (LF) | 39 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 4.9 mm |
| Tool Type | Drill |
| Length Group | Jobber |
| Usable Length (LU) | 41 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 77 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 135 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-4FL-SE-REG w/.125R AlTiN
Item #: MW21206603048
Brand: Monster Tool Company
Model #: 206-603048
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | AlTiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-4FL-SE-REG w/.125R
Item #: MW21206603045
Brand: Monster Tool Company
Model #: 206-603045
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | Bright |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Cutting Dia. 1/8″Shank Dia, 3 Flute, 82 Degrees, Carbide Countersink
Item #: TA15CS33208
Brand: Titan USA
Model #: CS33208
| Product Specifications | |
|---|---|
| Tool Type | Countersink |
| Point Angle (SIG) | 82 Degrees |
| Cutting Diameter (DC) | 1/8″ |
| Coating | Uncoated |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
L9717 - 1/8″ Dia. × 3/8″ LOC × 1/8″ Shank Dia. × 2″ OAL, 3 Flutes, Carbide, Bright Coating, Square End Mill
Item #: AC8841000305
Brand: Nachi America Inc
Model #: 41000305
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 3/8″ |
| End Shape | Square |
| Overall Length (OAL) | 2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Tool Type | End Mill |
| Coating | Bright |
| Decimal Equivalent | 0.125″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2.85 mm Dia., 135 Degrees, Jobber, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC860771934
Brand: Nachi America Inc
Model #: 0771934
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 2.85 mm |
| Point Angle (SIG) | 135 Degrees |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 2.85 mm |
| Tool Type | Drill |
| Length Group | Jobber |
| Flute Count (NOF) | 2 |
| Coating | Aqua Revo D |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2.8 mm Dia. × 4 mm Shank Dia. × 50 mm OAL, 180 Degrees, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC860765834
Brand: Nachi America Inc
Model #: 0765834
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 2.8 mm |
| Functional Length (LF) | 10 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 2.8 mm |
| Tool Type | Drill |
| Coating | Aqua Revo D |
| Usable Length (LU) | 12 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Overall Length (OAL) | 50 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 180 Degrees |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It