Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3617 Products)
36 x 1/4 x 1 - Oil Hardening Flat Stock
Item #: LY4054364
Manufacturer: Starrett
Mfg #: 54364
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/4
*Width: 1
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.5800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/16 x 4 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657430
Manufacturer: Starrett
Mfg #: 57430
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 9/16
*Width: 4
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 22.9500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/4 x 4-1/2 - Oil Hardening Flat Stock
Item #: LY4054485
Manufacturer: Starrett
Mfg #: 54485
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 3/4
*Width: 4-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 34.8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8X4X24 CARBON FLAT STOCK
Item #: LY8004070
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
Description:
Shipping Info:
*Actual Weight - 24.0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1-1/2 x 4 - Oil Hardening Flat Stock
Item #: LY5113206
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1-1/2
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 62.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/16 x 5 - Oil Hardening Flat Stock
Item #: LY5102014
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 5/16
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 16.1700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 5/32 x 6 - Oversize Air Hardening Flat Stock
Item #: LY701014
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 5/32
*Width: 6
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 5.2300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/16 x 1-1/4 - Air Hardening Flat Stock
Item #: LY4557304
Manufacturer: Starrett
Mfg #: 57304
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/16
*Width: 1-1/4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - .8100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 5/8 x 1 - Oil Hardening Flat Stock
Item #: LY4054174
Manufacturer: Starrett
Mfg #: 54174
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 5/8
*Width: 1
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 3.2300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2 x 2 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657483
Manufacturer: Starrett
Mfg #: 57483
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 2
*Width: 2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 40.8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4 x 8 x 18 - Air Hardening Flat Stock
Item #: LY4559130
Manufacturer: Starrett
Mfg #: 59130
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/4
*Width: 8
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 10.2000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/16 x 12 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054880
Manufacturer: Starrett
Mfg #: 54880
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1/16
*Width: 12
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 5.1000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 3/8 x 12 - Oil Hardening Flat Stock
Item #: LY4054135
Manufacturer: Starrett
Mfg #: 54135
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 3/8
*Width: 12
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 23.1900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 1/2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269276
Manufacturer: Starrett
Mfg #: 69276
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 3/16
*Width: 1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - .9600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1 x 4-1/2 - Oil Hardening Flat Stock
Item #: LY4054508
Manufacturer: Starrett
Mfg #: 54508
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1
*Width: 4-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 46.7200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/32 x 3-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8058290
Manufacturer: Starrett
Mfg #: 58290
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 5/32
*Width: 3-1/2
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 3.7200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8 x 1-1/2 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369485
Manufacturer: Starrett
Mfg #: 69485
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1/8
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 1.9100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/8 x 2-1/2 - Oil Hardening Flat Stock
Item #: LY4054467
Manufacturer: Starrett
Mfg #: 54467
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/8
*Width: 2-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 16.1200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4 x 1-1/2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269291
Manufacturer: Starrett
Mfg #: 69291
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1/4
*Width: 1-1/2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 3.8200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1-1/4 x 8 - Oil Hardening Flat Stock
Item #: LY4054238
Manufacturer: Starrett
Mfg #: 54238
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1-1/4
*Width: 8
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 50.7800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It