5/8-1/4X6.30"GL SHRINK EXTENSION

Item #: HA717758Z014Z
Manufacturer: Haimer USA LLC
Mfg #: 77.5/8Z0.1

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/2 x 3.54 - Shrink Fit Tool Holder

Item #: GM94C50503159
Manufacturer: Parlec
Mfg #: C50-50SF31

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C50-50SF315-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 8.0000

$327.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/16"-5" - Shrink Fit Holder with Coolblast

Item #: TE1229008B
Manufacturer: Techniks
Mfg #: 29008B

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Gage Length: 5 *Outside Diameter: 2.5 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1812

$293.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 14mm-100mm - Shrink Fit Holder

Item #: TE1229268
Manufacturer: Techniks
Mfg #: 29268

Technical Specifications:
*Bore Diameter: 14mm *Brand Name: Techniks *European-DIN Tool Shank Range: 14mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 14mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.55

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4550

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/8 x 5.12 Shrink Fit Chuck

Item #: HA715084438Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.844.3/8

Technical Specifications:
*Bore Diameter: 3/8 *Brand Name: Haimer USA LLC *Gage Length: 5.12 *Model Number: 50.844.3/8Z.4 *Outside Diameter: 1.26 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 9.2500

$591.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1/4"-6" - Shrink Fit Holder with Coolblast

Item #: TE1229014B
Manufacturer: Techniks
Mfg #: 29014B

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 6 *Outside Diameter: 2.5 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2187

$293.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12-20mm Presetting Stop Clip

Item #: HA728012302
Manufacturer: Haimer USA LLC
Mfg #: 80.123.02

Technical Specifications:
*Brand Name: Haimer USA LLC *Description: 10-20mm *Model Number: 80.123.02 *Type: Presetting Stop Clip

Description:

Shipping Info:

$244.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/4"-3.54" - Shrink Fit Holder with Coolblast

Item #: TE1229054B
Manufacturer: Techniks
Mfg #: 29054B

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 3.54 *Outside Diameter: 3.88 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4625

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 3/16"-3.54" - Shrink Fit Holder

Item #: TE1229052
Manufacturer: Techniks
Mfg #: 29052

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 4.8mm *Gage Length: 3.54 *Outside Diameter: 3.88 *Shank: 3/16 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 3/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .3993

$237.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1 x 6.30 Shrink Fit Chuck

Item #: HA71508421Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.842.1Z.

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Haimer USA LLC *Gage Length: 6.3 *Model Number: 50.842.1Z.4 *Outside Diameter: 2.09 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 9.0000

$629.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12-3mm Shrink Extension

Item #: HA7178120032
Manufacturer: Haimer USA LLC
Mfg #: 78.120.03.

Technical Specifications:
*Bore Diameter: 3mm *Brand Name: Haimer USA LLC *Gage Length: 160mm *Model Number: 78.120.03.2 *Outside Diameter: 8mm *Type: Shrink Fit Extension

Description:
*Straight shank shrink fit extention *Can accommodate any style holder *Highest Possible Clamping Force *< 3-micron T.I.R. *Works with collet holders, mill chucks, hydraulic holders and shink fit holders

Shipping Info:
*Actual Weight - .3300

$360.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

10MM TRIBOS-S EXTENSION

Item #: HF80205606
Manufacturer: Schunk
Mfg #: 205606

Technical Specifications:
*Brand Name: Schunk

Description:

Shipping Info:
*Actual Weight - 1.0000 *Dimensions - Height: 1.50 Length: 6.00 Width: 1.50

$233.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 5/8"-95.3mm - Shrink Fit Holder with Coolflex

Item #: TE1229032FB
Manufacturer: Techniks
Mfg #: 29032FB

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 15.9mm *Gage Length: 95.3mm *Outside Diameter: 2.5 *Shank: 5/8 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 5/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolFLEX (DIN B) Coolant through the flange as well as through the spindle *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .2375

$341.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 3/16X2.36"GL SHRINK FIT CHK

Item #: HA71E40140316Z
Manufacturer: Haimer USA LLC
Mfg #: E40.140.3/

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .7700

$360.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ER32 SRK 1/8X2.500 SHRINK FIT HLDR

Item #: EH4500709
Manufacturer: Iscar
Mfg #: 4500709

Technical Specifications:
*Brand Name: Iscar

Description:

Shipping Info:
*Actual Weight - .4740

$138.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 16mm x 130mm Shrink Fit Chuck

Item #: HA7150844164
Manufacturer: Haimer USA LLC
Mfg #: 50.844.16.

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Haimer USA LLC *Gage Length: 130mm *Model Number: 50.844.16.4 *Outside Diameter: 34mm *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 8.7500

$591.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 10mm-100mm - Shrink Fit Holder

Item #: TE1229260
Manufacturer: Techniks
Mfg #: 29260

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Techniks *European-DIN Tool Shank Range: 10mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 10mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.39

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4268

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 5/16" x 80 - Shrink Fit Holder

Item #: TE1293116
Manufacturer: Techniks
Mfg #: 93116

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 7.9mm *Gage Length: 80mm *Outside Diameter: 2.48 *Shank: 5/16 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 5/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1218

$289.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 1/4X3.15" GL SHRINK FIT CHK

Item #: HA71E4014014Z
Manufacturer: Haimer USA LLC
Mfg #: E40.140.1/

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .8800

$303.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 14mm x 80mm Shrink Fit Chuck

Item #: HA7140840144
Manufacturer: Haimer USA LLC
Mfg #: 40.840.14.

Technical Specifications:
*Bore Diameter: 14mm *Brand Name: Haimer USA LLC *Gage Length: 80mm *Model Number: 40.840.14.4 *Outside Diameter: 34mm *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 5.0000

$340.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It