HSK 63A 1/4" x 3.15" - Shrink Fit Holder with Coolblast

Item #: TE1293115B
Manufacturer: Techniks
Mfg #: 93115B

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 3.15 *Outside Diameter: 2.48 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1218

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/16 x 3.15 - Shrink Fit Tool Holder

Item #: GM94C40183159
Manufacturer: Parlec
Mfg #: C40-18SF31

Technical Specifications:
*Bore Diameter: 3/16 *Brand Name: Parlec *Gage Length: 3.150 *Model Number: C40-18SF315-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK 63A 5/8" x 3.74" - Shrink Fit Holder with Coolblast

Item #: TE1293121B
Manufacturer: Techniks
Mfg #: 93121B

Technical Specifications:
*Bore Diameter: 5/8 *Brand Name: Techniks *European-DIN Tool Shank Range: 15.9mm *Gage Length: 3.74 *Outside Diameter: 2.48 *Shank: 5/8 *Standard: ISO 1940 *Type: Shrink Fit HSK Holder *USA-ANSI Tool Shank Range: 5/8

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *CoolBLAST allows for in-the-bore coolant delivery onto the work piece *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1437

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

16MM-6MMX160MM GL SHRINK EXTENSION

Item #: HA7178160061
Manufacturer: Haimer USA LLC
Mfg #: 78.160.06.

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$250.85

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/4 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C50256309
Manufacturer: Parlec
Mfg #: C50-25SF63

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C50-25SF630-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$401.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 5/16 x 3.15 Shrink Fit Chuck

Item #: HA7150840516Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.840.5/1

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 50.840.5/16Z.4 *Outside Diameter: 1.06 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 8.0000

$515.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 5/16"-3.54" - Shrink Fit Holder

Item #: TE1229056
Manufacturer: Techniks
Mfg #: 29056

Technical Specifications:
*Bore Diameter: 5/16 *Brand Name: Techniks *European-DIN Tool Shank Range: 7.9mm *Gage Length: 3.54 *Outside Diameter: 3.88 *Shank: 5/16 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 5/16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4131

$237.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 16mm-100mm - Shrink Fit Holder

Item #: TE1229272
Manufacturer: Techniks
Mfg #: 29272

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Techniks *European-DIN Tool Shank Range: 16mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 16mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.63

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4687

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

20MM-12MMX200MM SHRINK EXTENSION

Item #: HA717720012
Manufacturer: Haimer USA LLC
Mfg #: 77.200.12

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$286.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 8mm-100mm - Shrink Fit Holder

Item #: TE1229256
Manufacturer: Techniks
Mfg #: 29256

Technical Specifications:
*Bore Diameter: 8mm *Brand Name: Techniks *European-DIN Tool Shank Range: 8mm *Gage Length: 100mm *Outside Diameter: 3.88 *Shank: 8mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.31

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4131

$336.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 3/4 x 3.15 Shrink Fit Chuck

Item #: HA714084034Z4
Manufacturer: Haimer USA LLC
Mfg #: 40.840.3/4

Technical Specifications:
*Bore Diameter: 3/4 *Brand Name: Haimer USA LLC *Gage Length: 3.15 *Model Number: 40.840.3/4Z.4 *Outside Diameter: 1.65 *Shank: CAT40 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 3.2500

$340.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT30 1/2"-3" - Shrink Fit Holder

Item #: TE1267500
Manufacturer: Techniks
Mfg #: 67500

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Techniks *European-DIN Tool Shank Range: 12.7mm *Gage Length: 3 *Outside Diameter: 1.81 *Shank: 1/2 *Standard: ISO 1940 *Type: Shrink Fit BT Holder *USA-ANSI Tool Shank Range: 1/2

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .0875

$247.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1-1/4"-4.13" - Shrink Fit Holder

Item #: TE1229072
Manufacturer: Techniks
Mfg #: 29072

Technical Specifications:
*Bore Diameter: 1-1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 31.8mm *Gage Length: 4.13 *Outside Diameter: 3.88 *Shank: 1-1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1-1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .4962

$309.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/4-6 - Shrink Fit Holder

Item #: TE12290546
Manufacturer: Techniks
Mfg #: 29054-6

Technical Specifications:
*Bore Diameter: 1/4 *Brand Name: Techniks *European-DIN Tool Shank Range: 6.4mm *Gage Length: 6 *Outside Diameter: 3.88 *Shank: 1/4 *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 1/4

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - 1.0000

$394.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 4mm-100mm - Shrink Fit Holder

Item #: TE1229204
Manufacturer: Techniks
Mfg #: 29204

Technical Specifications:
*Bore Diameter: 4mm *Brand Name: Techniks *European-DIN Tool Shank Range: 4mm *Gage Length: 100mm *Outside Diameter: 2.5 *Shank: 4mm *Standard: ISO 1940 *Type: Shrink Fit CAT Holder *USA-ANSI Tool Shank Range: 0.16

Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish *ShrinkFIT produces less wear and tear on the spindle bearings *Ideal for high-speed or high-torque machining *Maximum T.I.R. is 0.0001" *Each holder is lab certified for accuracy and comes with an individual lab report *Tool holders are balanced at 25,000 to G2.5 tolerance *Each holder comes with a coolant-thru set screw installed

Shipping Info:
*Actual Weight - .1381

$278.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BT40 7/8 x 3.54 - Shrink Fit Tool Holder

Item #: GM94BT40883549
Manufacturer: Parlec
Mfg #: BT40-88SF3

Technical Specifications:
*Bore Diameter: 7/8 *Brand Name: Parlec *Gage Length: 3.540 *Model Number: BT40-88SF354-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT50 1/2 x 5.12 Shrink Fit Chuck

Item #: HA715084412Z4
Manufacturer: Haimer USA LLC
Mfg #: 50.844.1/2

Technical Specifications:
*Bore Diameter: 1/2 *Brand Name: Haimer USA LLC *Gage Length: 5.12 *Model Number: 50.844.1/2Z.4 *Outside Diameter: 1.26 *Shank: CAT50 *Type: Shrink Fit Chuck

Description:
*Shrink fit chuck suitable to all kind of shrink fit units *Fine balanced to G2.5 at 25,000 RPM *Certified AT3 Taper *High runout accuracy < 3µ¼m *Heat resistant hot-working steel *Hardened 54-2 HRC *For HSS and solid carbide tools *Shank tolerance h6 *With threaded holes in order to balance with balancing screws *Cool Jet coolant bores that can be sealed included *Made in Germany

Shipping Info:
*Actual Weight - 9.5000

$591.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK-E40 3/8X3.15" GL SHRINK FIT CHK

Item #: HA71E4014038Z
Manufacturer: Haimer USA LLC
Mfg #: E40.140.3/

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .9900

$303.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

HSK100A 1/2 SHRINK FIT HOLDER

Item #: GM76500696
Manufacturer: Lyndex
Mfg #: H100A-SF05

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$443.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CAT40 1 x 3.94 - Shrink Fit Tool Holder

Item #: GM94C40103949
Manufacturer: Parlec
Mfg #: C40-10SF39

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 3.940 *Model Number: C40-10SF394-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$268.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It