Abrasives > Points & Burrs (ET04) - (23701 Products)
Abrasives > Points & Burrs (ET04)
1/2-4FL-SE-REG w/.090R
Item #: MW21206603039
Brand: Monster Tool Company
Model #: 206-603039
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.09″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | Bright |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2x3/8 82° 4FL CARB CNSK
Item #: MW18334006060
Brand: Monster Tool Company
Model #: 334-006060
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Angle | 41 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Series/List # | 334 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 82 Degrees |
| End Shape | Included Angle |
| Coating | Bright |
| Single / Double End | Single End |
| Cutting Edge Material | Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
I CARB TWIST DRILL
Item #: MW23450202720
Brand: Monster Tool Company
Model #: 450-202720
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | I |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | I |
| Grade | C-2 Sub-Micron |
| Length Group | Jobber |
| Point Shape | Drill Point |
| Coating | Bright |
| Measurement Type | Letter |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Series/List # | 450 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 2-1/8″ |
| Connection Diameter Machine Side (DCONMS) | 0.272″ |
| Overall Length (OAL) | 3-1/2″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 25 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.02″ Dia. × 0.06″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 FL, Carbide, AlTiN
Item #: TA15TC57220
Brand: Titan USA
Model #: TC57220
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.06″ |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC55433
Brand: Titan USA
Model #: TC55433
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/4″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC55430
Brand: Titan USA
Model #: TC55430
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.16″ |
| Depth of Cut Maximum (APMX) | 0.03″ |
| Corner Radius (RE) | 0.01″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Uncoated |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It