M.A. Ford - 9.5mm Cut Diam, 6mm Shank Diam, Cylinder with Radius Head Single Cut Burr - Carbide, Radius End, 19mm LOC, 169mm OAL

Item #: 50887074
Brand: M.A. Ford
Exact Tooling IR#: 04

Features and Benefits

Single cut burrs are designed with right hand spiral flutes that are designed for rapid stock removal, leaving a rougher finish than double cut burrs. They can be used on steel, stainless steel, cast iron and non-ferrous materials.

Product Specifications
Head Shape	Cylinder w/Radius
Industry Specification	SC-3L6M
Tooth Style	Single Cut
Cutting Diameter (mm)	9.50
Shank Diameter (mm)	6.0
Head Material	Carbide
Head Coating	None
End Style	Radius
Length of Cut (mm)	19.0
Overall Length (mm)	169

Product Specifications

Head Shape Cylinder w/Radius

Industry Specification SC-3L6M

Tooth Style Single Cut

Cutting Diameter (mm) 9.50

Shank Diameter (mm) 6.0

Head Material Carbide

Head Coating None

End Style Radius

Length of Cut (mm) 19.0

Overall Length (mm) 169

$37.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/2" Cut Diam, 1/4" Shank Diam, Cone Head Chipbreaker Cut Burr - Carbide, 1-1/8" LOC, 2-7/8" OAL

Item #: 51971711
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Chipbreaker cut burrs are designed to provide better control and reduce chipping. They are used on hard materials like steel and cast iron.

Product Specifications
Head Shape	Cone
Industry Specification	SL-4CB
Tooth Style	Chipbreaker Cut
Cutting Diameter (Inch)	1/2
Shank Diameter (Inch)	1/4
Head Material	Carbide
Coating	AlTiN
Head Coating	Aluminum Titanium Nitride
Length of Cut (Inch)	1-1/8
Length of Cut (Decimal Inch)	1-1/8
Maximum RPM (General)	25000
Overall Length (Inch)	2-7/8
Included Angle	14

Product Specifications

Head Shape Cone

Industry Specification SL-4CB

Tooth Style Chipbreaker Cut

Cutting Diameter (Inch) 1/2

Shank Diameter (Inch) 1/4

Head Material Carbide

Coating AlTiN

Head Coating Aluminum Titanium Nitride

Length of Cut (Inch) 1-1/8

Length of Cut (Decimal Inch) 1-1/8

Maximum RPM (General) 25000

Overall Length (Inch) 2-7/8

Included Angle 14

$47.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 1/4" Cut Diam, 1/8" Shank Diam, Tree Head Fine Diamond Cut Burr - Carbide, Point End, 1/2" LOC, 2" OAL

Item #: 58267964
Brand: M.A. Ford
Exact Tooling IR#: 04

Features and Benefits

Fine diamond cut burrs are designed for finishing and where removal of stock is not required. They feature both a left handed and standard or fine cutting fluting system. For machining ferrous and stainless steel.

Product Specifications
Head Shape	Tree
Industry Specification	SG-51-F
Tooth Style	Fine Diamond Cut
Cutting Diameter (Inch)	1/4
Shank Diameter (Inch)	1/8
Head Material	Carbide
Coating	Uncoated
End Style	Point
Length of Cut (Inch)	1/2
Overall Length (Inch)	2
Additional Information	Modified Standard, Non-Returnable & Non-Cancelable

Product Specifications

Head Shape Tree

Industry Specification SG-51-F

Tooth Style Fine Diamond Cut

Cutting Diameter (Inch) 1/4

Shank Diameter (Inch) 1/8

Head Material Carbide

Coating Uncoated

End Style Point

Length of Cut (Inch) 1/2

Overall Length (Inch) 2

Additional Information Modified Standard, Non-Returnable & Non-Cancelable

$23.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Cut Diam, 1/4" Shank Diam, Cone Head Double Cut Burr - Carbide, 1/8" LOC, 2" OAL

Item #: 51980969
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Double cut burrs are designed with right and left hand flutes combined to produce smooth and fine finishes. They produce small chips and give excellent control of the burr and grinder. They can be used on steel, stainless steel, high temp alloys and cast iron.

Product Specifications
Head Shape	Cone
Industry Specification	SK-1DEDC
Tooth Style	Double Cut
Cutting Diameter (Inch)	1/4
Shank Diameter (Inch)	1/4
Head Material	Carbide
Coating	AlTiN
Head Coating	Aluminum Titanium Nitride
Length of Cut (Inch)	1/8
Length of Cut (Decimal Inch)	1/8
Maximum RPM (General)	35000
Overall Length (Inch)	2
Included Angle	90

Product Specifications

Head Shape Cone

Industry Specification SK-1DEDC

Tooth Style Double Cut

Cutting Diameter (Inch) 1/4

Shank Diameter (Inch) 1/4

Head Material Carbide

Coating AlTiN

Head Coating Aluminum Titanium Nitride

Length of Cut (Inch) 1/8

Length of Cut (Decimal Inch) 1/8

Maximum RPM (General) 35000

Overall Length (Inch) 2

Included Angle 90

$24.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 1/4" Cut Diam, 1/4" Shank Diam, Tree Head Single Cut Burr - Carbide, 5/8" LOC, 2" OAL

Item #: 51922169
Brand: Made in USA
Exact Tooling IR#: 04

Features and Benefits

Single cut burrs are designed with right hand spiral flutes that are designed for rapid stock removal, leaving a rougher finish than double cut burrs. They can be used on steel, stainless steel, cast iron and non-ferrous materials.

Product Specifications
Head Shape	Tree
Industry Specification	SG-1SC
Tooth Style	Single Cut
Cutting Diameter (Inch)	1/4
Shank Diameter (Inch)	1/4
Head Material	Carbide
Coating	TiN
Head Coating	Titanium Nitride
Length of Cut (Inch)	5/8
Length of Cut (Decimal Inch)	5/8
Maximum RPM (General)	35000
Overall Length (Inch)	2

Product Specifications

Head Shape Tree

Industry Specification SG-1SC

Tooth Style Single Cut

Cutting Diameter (Inch) 1/4

Shank Diameter (Inch) 1/4

Head Material Carbide

Coating TiN

Head Coating Titanium Nitride

Length of Cut (Inch) 5/8

Length of Cut (Decimal Inch) 5/8

Maximum RPM (General) 35000

Overall Length (Inch) 2

$22.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS Pro - 8 Piece, 3/16" Shank Burr Set - Tungsten Carbide, Multiple Head Shape

Item #: 05289764
Brand: SGS Pro
Exact Tooling IR#: 04

Features and Benefits

Tungsten Carbide (TC) is used at high temperatures due to its high wear resistance. It is commonly used on ferrous and non-ferrous materials including cast iron, nickel alloys and stainless steel.

Product Specifications
Head Shape	Ball; Cone; Cylinder; Cylinder w/Radius End; Inverted Taper; Oval; Tree w/Pointed End; Tree w/Radius End
Tooth Style	Single Cut
Cutting Diameter (Inch)	3/16
Number of Pieces	8
Shank Diameter (Inch)	3/16
Overall Length (Inch)	2
Head Material	Tungsten Carbide
Industry Specification	SA-81; SC-81; SD-81; SE-81; SF-81; SG-81; SL-81; SN-81

Product Specifications

Head Shape Ball; Cone; Cylinder; Cylinder w/Radius End; Inverted Taper; Oval; Tree w/Pointed End; Tree w/Radius End

Tooth Style Single Cut

Cutting Diameter (Inch) 3/16

Number of Pieces 8

Shank Diameter (Inch) 3/16

Overall Length (Inch) 2

Head Material Tungsten Carbide

Industry Specification SA-81; SC-81; SD-81; SE-81; SF-81; SG-81; SL-81; SN-81

$176.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Made in USA - 3 Piece, 1/4" Shank Burr Set - Multiple Head Shapes, Solid Carbide

Item #: 44466316
Brand: Made in USA
Exact Tooling IR#: 04

Product Specifications
Head Shape	(3) Tree w/Radius End
Tooth Style	Double Cut
Cutting Diameter (Inch)	1/4; 3/8; 1/2
Number of Pieces	3
Shank Diameter (Inch)	1/4
Head Material	Solid Carbide
Industry Specification	SF-1; SF-3; SF-5
Finish/Coating	Uncoated
Cutting Diameter (Decimal Inch)	0.2500; 0.3750; 0.5000
Shank Diameter (Decimal Inch)	1/4
Overall Length (Decimal Inch)	2.0000; 2.5000; 2.7500

$75.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 10 Piece, 3mm Shank Burr Set - Solid Carbide, Multiple Head Shapes, 3° Included Angle

Item #: 58195983
Brand: M.A. Ford
Exact Tooling IR#: 04

Product Specifications
Head Shape	Cylinder; Ball; Cone; Cylinder Ball End; Egg; Inverted Taper; Pointed Cone; Pointed Tree; Round Tree
Tooth Style	Fine Cut
Cutting Diameter (Metric)	3.00
Number of Pieces	10
Shank Diameter (mm)	3
Overall Length (mm)	38
Head Material	Solid Carbide
Industry Specification	SA-43M; SC-42M; SC-41M; SD-42M; SE-41M; SF-41M; SG-41M; SM-45M; SL-42M; SN-42M
Finish/Coating	Bright

$117.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It