Holemaking > Drilling & Drill Bits (ET04) - (127326 Products)
Holemaking > Drilling & Drill Bits (ET04)
9/16 ST FL RHC REAMER
Item #: MW20500001036
Brand: Monster Tool Company
Model #: 500-001036
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 9/16″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Fractional |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 9/16″ |
| Decimal Equivalent | 0.5625″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 9/32″ Dia. × 3/4″ LOC × 5/16″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, TiCN
Item #: TA15TC92118
Brand: Titan USA
Model #: TC92118
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 9/32″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Usable Length (LU) | 3/4″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Corner Radius (RE) | 9/64″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.2813″ |
| Coating | TiCN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 1/16″ Dia. × 0.186″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC58824
Brand: Titan USA
Model #: TC58824
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 3/4″ |
| Depth of Cut Maximum (APMX) | 0.186″ |
| Corner Radius (RE) | 0.031″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0625″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4-2FL-SE-REG w/.025R
Item #: MW21204602563
Brand: Monster Tool Company
Model #: 204-602563
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.025″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.25″ |
| Coating | Bright |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9 CARB ST FL DRILL AlTiN
Item #: MW23470301960B
Brand: Monster Tool Company
Model #: 470-301960B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #9 |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #9 |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | TiAlN |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-3/16″ |
| Connection Diameter Machine Side (DCONMS) | 0.196″ |
| Overall Length (OAL) | 2-1/4″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-3/16″ |
| Single / Double End | Single End |
| Cutting Edge Material | Solid Tungsten Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It