Holemaking > Drilling & Drill Bits (ET04) - (127326 Products)
Holemaking > Drilling & Drill Bits (ET04)
Air Drill: 3/8" Keyed Chuck, Reversible
Item #: 38090213
Brand: Sunex Tools
Model #: SX223Product Specifications
Chuck Size
3/8
Chuck Type
Keyed
Handle Type
Pistol Grip
Reversible
Yes
Inlet Size (NPT)
1/4
Speed (RPM)
1800
UNSPSC Code
27131505
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: DeWALT / Part #: DWA1181
Item #: 98854235
Brand: DeWALT
Model #: DWA1181Product Specifications
Drill Bit Set Type
Hex Shank Drill Bits
Number of Pieces
21.000
Tool Material
Steel
Shank Type
Hex
Coating/Finish
Gold; Black Finish
Point Type
Straight
Drill Bit Sizes Included (Inch)
1/16;1/2;1/4;1/8;11/64;13/64;15/64;3/16;3/32;3/8;5/16;5/32;5/64;7/32;7/64;9/64;1/16;1/2;1/4;1/8;11/64;13/64;15/64;3/16;3/32;3/8;5/16;5/32;5/64;7/32;7/64;9/64
Contents
1/16 in, 1/2 in, 1/4 in, 1/8 in, 11/64 in, 13/64 in, 15/64 in, 3/16 in, 3/32 in, 3/8 in, 5/16 in, 5/32 in, 5/64 in, 7/32 in, 7/64 in, 9/64 in, 1/16 in, 1/2 in, 1/4 in, 1/8 in, 11/64 in, 13/64 in, 15/64 in, 3/16 in, 3/32 in, 3/8 in, 5/16 in, 5/32 in, 5/64 in, 7/32 in, 7/64 in, 9/64 in Bits
Coolant Through
No
Cutting Direction
Right Hand
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-2FL-SE-REG w/.090R
Item #: MW21204603039
Brand: Monster Tool Company
Model #: 204-603039
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.09″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | Bright |
| Series/List # | 204 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4574 ST FL RHC REAMER
Item #: MW205000004574
Brand: Monster Tool Company
Model #: 500-0004574
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4574″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4574″ |
| Decimal Equivalent | 0.4574″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4573 ST FL RHC REAMER
Item #: MW205000004573
Brand: Monster Tool Company
Model #: 500-0004573
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4573″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4573″ |
| Decimal Equivalent | 0.4573″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4572 ST FL RHC REAMER
Item #: MW205000004572
Brand: Monster Tool Company
Model #: 500-0004572
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4572″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4572″ |
| Decimal Equivalent | 0.4572″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4571 ST FL RHC REAMER
Item #: MW205000004571
Brand: Monster Tool Company
Model #: 500-0004571
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4571″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4571″ |
| Decimal Equivalent | 0.4571″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2714 ST FL RHC REAMER
Item #: MW205000002714
Brand: Monster Tool Company
Model #: 500-0002714
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2714″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2714″ |
| Decimal Equivalent | 0.2714″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2713 ST FL RHC REAMER
Item #: MW205000002713
Brand: Monster Tool Company
Model #: 500-0002713
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2713″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2713″ |
| Decimal Equivalent | 0.2713″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2711 ST FL RHC REAMER
Item #: MW205000002711
Brand: Monster Tool Company
Model #: 500-0002711
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2711″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2711″ |
| Decimal Equivalent | 0.2711″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2710 ST FL RHC REAMER
Item #: MW205000002710
Brand: Monster Tool Company
Model #: 500-0002710
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.271″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.271″ |
| Decimal Equivalent | 0.271″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1702 ST FL RHC REAMER
Item #: MW205000001702
Brand: Monster Tool Company
Model #: 500-0001702
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1702″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1702″ |
| Decimal Equivalent | 0.1702″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1701 ST FL RHC REAMER
Item #: MW205000001701
Brand: Monster Tool Company
Model #: 500-0001701
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1701″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1701″ |
| Decimal Equivalent | 0.1701″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/64-2FL-SE-STUB BN AlTiN
Item #: MW21219031035
Brand: Monster Tool Company
Model #: 219-031035
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/64″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 7/32″ |
| Length Group | Stub |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.1094″ |
| Coating | TiAlN |
| Series/List # | 219 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-4FL-SE-REG BN
Item #: MW21223001160
Brand: Monster Tool Company
Model #: 223-001160
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Length Group | Regular |
| Overall Length (OAL) | 4″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Series/List # | 223 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8-2FL-90° MARK CTR (.005) AlTiN
Item #: MW21209792125B
Brand: Monster Tool Company
Model #: 209-792125B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Coating | AlTiN |
| Decimal Equivalent | 0.125″ |
| Grade | C-2 Sub-Micron |
| Flute Count (NOF) | 2 |
| End Shape | Included Angle |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Series/List # | 209 |
| Point Angle (SIG) | 90 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Solid Tungsten Carbide |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-2FL-SE-EXT-X/LG 1-1/2x6 AlTiN
Item #: MW21216001059
Brand: Monster Tool Company
Model #: 216-001059
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 6″ |
| Length Group | Extended Extra Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | AlTiN |
| Series/List # | 216 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0967 ST FL RHC REAMER
Item #: MW205000000967
Brand: Monster Tool Company
Model #: 500-0000967
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0967″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 5/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 5/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0967″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0967″ |
| Overall Length (OAL) | 2-1/4″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.060-2FL-SE-REG-.015R AlTiN
Item #: MW212505206015B
Brand: Monster Tool Company
Model #: 250-5206015B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.06″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.18″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.06″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Air Drill: 1/2" Keyed Chuck, Reversible
Item #: 38090221
Brand: Sunex Tools
Model #: SX221BProduct Specifications
Chuck Size
1/2
Chuck Type
Keyed
Handle Type
Pistol Grip
Reversible
Yes
Inlet Size (NPT)
1/4
Speed (RPM)
500
UNSPSC Code
27131505
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It