Power Tools > Power Drills (ET04) - (6695 Products)
Power Tools > Power Drills (ET04)
Brand: Federal Signal Emergency / Part #: SPLCABLE-1
Item #: 97759435
Brand: Federal Signal Emergency
Model #: SPLCABLE-1Product Specifications
Light Assembly Type
LED Snow Plow Light Cable
Flash Type
Variable
Voltage
12
Mount Type
None
Power Source
12V DC
Overall Height
2 in
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.030-4FL-SE-REG-.005R
Item #: MW212505403005
Brand: Monster Tool Company
Model #: 250-5403005
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.03″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.005″ |
| Depth of Cut Maximum (APMX) | 0.09″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.03″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0295 ST FL RHC REAMER
Item #: MW205000000295
Brand: Monster Tool Company
Model #: 500-0000295
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0295″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Measurement Type | Inch |
| Usable Length (LU) | 1/4″ |
| Series/List # | 500 |
| Cutting Edge Length (L) | 1/4″ |
| Tool Type | Reamer |
| Connection Diameter Machine Side (DCONMS) | 0.023″ |
| Decimal Equivalent | 0.0295″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
| Coating | Bright |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.027-4FL-SE-REG-BALL
Item #: MW21250340027
Brand: Monster Tool Company
Model #: 250-340027
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.027″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.081″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.027″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.026-2FL-SE-REG
Item #: MW21250200310
Brand: Monster Tool Company
Model #: 250-200310
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.026″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.078″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.026″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.025-2FL-SE-STUB-AlTiN
Item #: MW21250300300B
Brand: Monster Tool Company
Model #: 250-300300B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.025″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.038″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.025″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It