Safety > Personal Protective Equipment (ET04) - (59303 Products)
Safety > Personal Protective Equipment (ET04)
.1858 ST FL RHC REAMER
Item #: MW205000001858
Brand: Monster Tool Company
Model #: 500-0001858
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1858″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1858″ |
| Decimal Equivalent | 0.1858″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Onward / Part #: 94232FBBC
Item #: 88837091
Brand: Onward
Model #: 94232FBBCProduct Specifications
Hinge Material
Steel
Hinge Type
Gate
Mount Type
Screw-On
Length (Inch)
4
Load Capacity (Lb. - 3 Decimals)
400.000
Number Of Mounting Holes
12.000
Length (Decimal Inch - 4 Decimals)
4.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-90° 4FL DE CARB CNSK
Item #: MW18334206070
Brand: Monster Tool Company
Model #: 334-206070
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Angle | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | 334 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 90 Degrees |
| End Shape | Included Angle |
| Coating | Bright |
| Single / Double End | Double End |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.5″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Best / Part #: 711061682
Item #: 95620209
Brand: Best
Model #: 711061682Product Specifications
Mount Type
Full-Mortise
Hinge Material
Steel
Finish
Primed
Number Of Mounting Holes
8.000
Pin Material
Stainless Steel
Class
168FBB
Standards
BHMA Certified; ANSI A8111
Number Of Knuckles
5.000
Product Service Code
5340
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1880 ST FL RHC REAMER
Item #: MW205000001880
Brand: Monster Tool Company
Model #: 500-0001880
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.188″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.188″ |
| Decimal Equivalent | 0.188″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.038-2FL-SE-STUB
Item #: MW21250300430
Brand: Monster Tool Company
Model #: 250-300430
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.038″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.057″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.038″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
22 CARB ST FL DRILL
Item #: MW23470301570
Brand: Monster Tool Company
Model #: 470-301570
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #22 |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #22 |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | Bright |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-1/16″ |
| Connection Diameter Machine Side (DCONMS) | 0.157″ |
| Overall Length (OAL) | 2-1/8″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-1/16″ |
| Single / Double End | Single End |
| Cutting Edge Material | Solid Tungsten Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.5012 ST FL RHC REAMER
Item #: MW205000005012
Brand: Monster Tool Company
Model #: 500-0005012
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5012″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.5012″ |
| Decimal Equivalent | 0.5012″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1876 ST FL RHC REAMER
Item #: MW205000001876
Brand: Monster Tool Company
Model #: 500-0001876
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1876″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 7/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 7/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1876″ |
| Decimal Equivalent | 0.1876″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 2-3/4″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Neck Length (LN) | 5/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8-4FL-SE-REG w/.015R TiCN
Item #: MW21206602308
Brand: Monster Tool Company
Model #: 206-602308
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.125″ |
| Coating | TiCN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.0313″ Drill DIA × 60° Included High Speed Steel #0 Combined Drill and Countersink, 2 Flutes, AlTiN Coated
Item #: TA15CS35010
Brand: Titan USA
Model #: CS35010
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 1/32″ |
| Overall Length (OAL) | 1-1/4″ |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 1/32″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Decimal Equivalent | 0.0313″ |
| Coating | AlTiN |
| Point Angle (SIG) | 118 Degrees |
| Cutting Edge Material | HSS |
| Angle | 60 Degrees |
| Measurement Type | Inch |
| Protruding Length (LPR) | 0.038″ |
| Tool Type | Combined Drill and Countersink |
| Flute Count (NOF) | 2 |
| Single / Double End | Double End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.090-4FL-SE-STUB-.015R AlTiN
Item #: MW212506409015B
Brand: Monster Tool Company
Model #: 250-6409015B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.09″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.135″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.09″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1049 ST FL RHC REAMER
Item #: MW205000001049
Brand: Monster Tool Company
Model #: 500-0001049
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1049″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 5/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 5/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1049″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.1049″ |
| Overall Length (OAL) | 2-1/4″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.090-4FL-SE-STUB-.015R
Item #: MW212506409015
Brand: Monster Tool Company
Model #: 250-6409015
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.09″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.135″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.09″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1044 ST FL RHC REAMER
Item #: MW205000001044
Brand: Monster Tool Company
Model #: 500-0001044
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1044″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 5/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 5/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1044″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.1044″ |
| Overall Length (OAL) | 2-1/4″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.1043 ST FL RHC REAMER
Item #: MW205000001043
Brand: Monster Tool Company
Model #: 500-0001043
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.1043″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 5/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 5/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.1043″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.1043″ |
| Overall Length (OAL) | 2-1/4″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40, 5/8″ × 4″ Hydraulic Chuck
Item #: HF801447900
Brand: SCHUNK
Model #: 1447900
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | CAT40 |
| Shank Type | CAT |
| Body Length (LB) | 83 mm |
| Shank Size (SS) | 40 |
| Connection Diameter Workpiece Side (DCONWS) | 5/8″ |
| Nose Diameter | 32 mm |
| Body Diameter (BD) | 38 mm |
| Tool Type | Hydraulic Chuck |
| Overall Length (OAL) | 4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SH-41 L2 S/C
Item #: MW17310006325
Brand: Monster Tool Company
Model #: 310-006325
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 1/4″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Single Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Grade | C-2 Sub-Micron |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Single / Double End | Single End |
| Coating | Bright |
| Length Group | Regular |
| End Shape | Flame |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Sugatsune / Part #: ALH-200BL
Item #: 88352042
Brand: Sugatsune
Model #: ALH-200BLProduct Specifications
Width (Inch)
7-7/8
Depth (Inch)
1-7/64
Distance Between Centers Width
2-61/64
Height (Inch)
1-7/32
Material
Aluminum Alloy
Finish Coating
Satin; Anodized
Thickness (Inch)
9/32
Hole Diameter (Inch)
15/32
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Best / Part #: 711064343
Item #: 90996943
Brand: Best
Model #: 711064343Product Specifications
Mount Type
Full-Mortise
Hinge Material
Steel
Finish
Primed
Number Of Knuckles
5.000
Product Service Code
5340
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It